# UpFeed **URL:** https://tech-community.robotics.abb.com/c/robotstudio/upfeed/23.md?page=6 [Latest](https://tech-community.robotics.abb.com/latest.md) · [Categories](https://tech-community.robotics.abb.com/categories.md) · [Tags](https://tech-community.robotics.abb.com/tags.md) **Page:** 7 --- ## [Will you be adding a new forum category for RobotStudio 2019?](https://tech-community.robotics.abb.com/t/will-you-be-adding-a-new-forum-category-for-robotstudio-2019/8880)
**Author:** [@lemster68](https://tech-community.robotics.abb.com/u/lemster68)\ **Replies:** 1\ **Last updated:** [June 10, 2019, 6:28am UTC](https://tech-community.robotics.abb.com/t/will-you-be-adding-a-new-forum-category-for-robotstudio-2019/8880 "2019-06-10T06:28:13Z")
In order to differentiate it from the older versions, will you make a new category in the forum? --- ## [\[Wish\] Possibility to add OffS or RelTool on Simulation Move Instruction.](https://tech-community.robotics.abb.com/t/wish-possibility-to-add-offs-or-reltool-on-simulation-move-instruction/8870)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 0\ **Last updated:** [June 1, 2019, 12:45pm UTC](https://tech-community.robotics.abb.com/t/wish-possibility-to-add-offs-or-reltool-on-simulation-move-instruction/8870 "2019-06-01T12:45:44Z")
Hello, Is it possible to add the ability to edit ToPoint field in Station Move instruction? For now we have to synchronize with RAPID, add OffS then sync to Station. --- ## [\[Wish\] Option to Rename Virtual Controller when created using backup](https://tech-community.robotics.abb.com/t/wish-option-to-rename-virtual-controller-when-created-using-backup/8853)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 0\ **Last updated:** [May 24, 2019, 12:27pm UTC](https://tech-community.robotics.abb.com/t/wish-option-to-rename-virtual-controller-when-created-using-backup/8853 "2019-05-24T12:27:00Z")
Hello, When creating new Virtual Controller from backup, RS, by default, use the real controller name. And it’s a mess when connecting online with the real controller and using Virtual one in same time, or when you mak… --- ## [Hidden procedure in Rapid Browser Content](https://tech-community.robotics.abb.com/t/hidden-procedure-in-rapid-browser-content/8849)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 0\ **Last updated:** [May 23, 2019, 12:24pm UTC](https://tech-community.robotics.abb.com/t/hidden-procedure-in-rapid-browser-content/8849 "2019-05-23T12:24:47Z")
Hello, When a procedure is marked hidden in MMC.cfg MMC\_REAL\_ROUTINE: range, it disappears of RAPID Browser Content tree. Does an option to show them exists? --- ## [RobotStudio can't find correct RobotWare](https://tech-community.robotics.abb.com/t/robotstudio-cant-find-correct-robotware/7530)
**Author:** [@DavidR](https://tech-community.robotics.abb.com/u/DavidR)\ **Replies:** 10\ **Last updated:** [April 30, 2019, 11:40pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-cant-find-correct-robotware/7530 "2019-04-30T23:40:14Z")
This happens (see image below) when I try to create system from backup. If correct RobotWare is selected from the beginning, everything works but if too new is selected there is no way to select the correct one. /David … --- ## [Failed to import geometry](https://tech-community.robotics.abb.com/t/failed-to-import-geometry/8784)
**Author:** [@lpb4040](https://tech-community.robotics.abb.com/u/lpb4040)\ **Replies:** 0\ **Last updated:** [April 12, 2019, 1:15pm UTC](https://tech-community.robotics.abb.com/t/failed-to-import-geometry/8784 "2019-04-12T13:15:33Z")
Hello, For every time I trying to import CAD models i get this error, olny Ascii and Stl files are working fine. (RobotStudio 6.08.01) On other computer with same specs, os, robotstudio version, there is no problem wit… --- ## [simulate ES,GS,SS Safety signals](https://tech-community.robotics.abb.com/t/simulate-es-gs-ss-safety-signals/8774)
**Author:** [@daniel72](https://tech-community.robotics.abb.com/u/daniel72)\ **Replies:** 2\ **Last updated:** [April 12, 2019, 11:18am UTC](https://tech-community.robotics.abb.com/t/simulate-es-gs-ss-safety-signals/8774 "2019-04-12T11:18:45Z")
ES, GS, AS are defined in SafeMove as safe signals, if I activate this configuration offline in RS6.08 I get the error: 90541 Superior-Stop from SC-Controller How can I simulate SS, ES, GS, SS signals permanently in the… --- ## [RS 6.08.01 Hose Simulator Fault](https://tech-community.robotics.abb.com/t/rs-6-08-01-hose-simulator-fault/8776)
**Author:** [@daguilar](https://tech-community.robotics.abb.com/u/daguilar)\ **Replies:** 2\ **Last updated:** [April 11, 2019, 12:23pm UTC](https://tech-community.robotics.abb.com/t/rs-6-08-01-hose-simulator-fault/8776 "2019-04-11T12:23:31Z")
Hi, I came with this problem on the Hose Simulator. Let me say first that the Hose Simulator is a very good tool for engineering, thanks for the implementation of that. Here I attached what’s happening with the hose sim… --- ## [\[Wish\] Create Mechanism: Allow to select child component group](https://tech-community.robotics.abb.com/t/wish-create-mechanism-allow-to-select-child-component-group/8724)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 0\ **Last updated:** [March 6, 2019, 2:17pm UTC](https://tech-community.robotics.abb.com/t/wish-create-mechanism-allow-to-select-child-component-group/8724 "2019-03-06T14:17:52Z")
Hello, Is it possible to allow in Mechanism creation, when creating Link, to enable selection of children components? For now, we can only select component in root tree. --- ## [Suggestion: Add MaxTime to CamReqImage](https://tech-community.robotics.abb.com/t/suggestion-add-maxtime-to-camreqimage/8714)
**Author:** [@veritas](https://tech-community.robotics.abb.com/u/veritas)\ **Replies:** 0\ **Last updated:** [February 27, 2019, 2:06pm UTC](https://tech-community.robotics.abb.com/t/suggestion-add-maxtime-to-camreqimage/8714 "2019-02-27T14:06:52Z")
I have been experiencing trouble when adding the switch argument “AwaitComplete” to the instruction CamReqImage. From time to time, when requesting an image, the camera seems to get stuck in an endless loop. The instruct… --- ## [ABB IRB2400L ("IRB2400L\_7\_180\_\_03.rslib" in RobotStudio 6.08) and virtual controller problem](https://tech-community.robotics.abb.com/t/abb-irb2400l-irb2400l-7-180-03-rslib-in-robotstudio-6-08-and-virtual-controller-problem/8683)
**Author:** [@MRR](https://tech-community.robotics.abb.com/u/MRR)\ **Replies:** 2\ **Last updated:** [February 3, 2019, 9:49am UTC](https://tech-community.robotics.abb.com/t/abb-irb2400l-irb2400l-7-180-03-rslib-in-robotstudio-6-08-and-virtual-controller-problem/8683 "2019-02-03T09:49:28Z")
Hi everybody, We have an old ABB IRB 2400L (orange version). I am trying to use the model “IRB2400L\_7\_180\_\_03.rslib” which is included in the ABB library (“others” folder) in RobotStudio 6.08. I can import this model in… --- ## [Suggestion: Step Mode 'Next Move' also to RS](https://tech-community.robotics.abb.com/t/suggestion-step-mode-next-move-also-to-rs/8624)
**Author:** [@Risto\_Virtanen](https://tech-community.robotics.abb.com/u/Risto_Virtanen)\ **Replies:** 0\ **Last updated:** [December 21, 2018, 11:18am UTC](https://tech-community.robotics.abb.com/t/suggestion-step-mode-next-move-also-to-rs/8624 "2018-12-21T11:18:28Z")
‘Next Move’ is a practical function but only available on FP. Please add it to RS ‘Test and Debug’ section. --- ## [Documentation update needed](https://tech-community.robotics.abb.com/t/documentation-update-needed/8612)
**Author:** [@Risto\_Virtanen](https://tech-community.robotics.abb.com/u/Risto_Virtanen)\ **Replies:** 0\ **Last updated:** [December 17, 2018, 6:59am UTC](https://tech-community.robotics.abb.com/t/documentation-update-needed/8612 "2018-12-17T06:59:16Z")
This request applies to the document: Technical reference manual RAPID Instructions, Functions and Data types RobotWare 6.08 Document id: 3HAC050917-001Revision H Chapter: Data types listitem - List ite… --- ## [Targets disappear after an unsuccessful attempt to Cut-Paste](https://tech-community.robotics.abb.com/t/targets-disappear-after-an-unsuccessful-attempt-to-cut-paste/8602)
**Author:** [@StefanGrushko](https://tech-community.robotics.abb.com/u/StefanGrushko)\ **Replies:** 2\ **Last updated:** [December 14, 2018, 8:59am UTC](https://tech-community.robotics.abb.com/t/targets-disappear-after-an-unsuccessful-attempt-to-cut-paste/8602 "2018-12-14T08:59:44Z")
Hello, It seems that Cut-Paste functionality of Paths&Targets has a small issue with pasting Targets to workobjects/other targets. Whenever I try to paste a previously cut target into other target/workobject an error “M… --- ## [RW version](https://tech-community.robotics.abb.com/t/rw-version/8564)
**Author:** [@TMiguel](https://tech-community.robotics.abb.com/u/TMiguel)\ **Replies:** 4\ **Last updated:** [November 21, 2018, 4:09pm UTC](https://tech-community.robotics.abb.com/t/rw-version/8564 "2018-11-21T16:09:37Z")
Hello all Where I find RobotWare 5.15.2005.02 to download? Thank you --- ## [Visualize World Zones](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952)
**Author:** [@THOD](https://tech-community.robotics.abb.com/u/THOD)\ **Replies:** 6\ **Last updated:** [November 9, 2018, 5:41pm UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952 "2018-11-09T17:41:24Z")
It would be great if we can setup world zones offline and then be able to sync them to the controller. This would be a huge advantage! --- ## [Signal Analyser Online dosen't work RS 6.07](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248)
**Author:** [@ErikHagman](https://tech-community.robotics.abb.com/u/ErikHagman)\ **Replies:** 4\ **Last updated:** [November 8, 2018, 9:33pm UTC](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248 "2018-11-08T21:33:24Z")
Hello! Have tried 32 and 64 bit but Signal Analyzer doesn’t seem to be working. Anyone else with this problem? --- ## [\[wish\] Visual SafeMove MTZ Import: Have a value for Top and Bottom](https://tech-community.robotics.abb.com/t/wish-visual-safemove-mtz-import-have-a-value-for-top-and-bottom/8512)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 1\ **Last updated:** [November 8, 2018, 1:44pm UTC](https://tech-community.robotics.abb.com/t/wish-visual-safemove-mtz-import-have-a-value-for-top-and-bottom/8512 "2018-11-08T13:44:44Z")
Hello, When you import values form RAPID in MTZ, you have to update each time Top and Bottom ones, as they are set to default 1000,0. Would be great if it can read num nMTZ\_Set\_1\_Top and nMTZ\_Set\_1\_Bot. Or at least le… --- ## [\[SmartComponent\] Exposed Child Property is not updated](https://tech-community.robotics.abb.com/t/smartcomponent-exposed-child-property-is-not-updated/8354)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 2\ **Last updated:** [November 8, 2018, 1:23pm UTC](https://tech-community.robotics.abb.com/t/smartcomponent-exposed-child-property-is-not-updated/8354 "2018-11-08T13:23:02Z")
Hello, I’ve made an Empty Smart Component, add some other in it and expose a child property. At this time child got AllowedValues attribute that parent takes. When this child’s AllowedValues change, parent one doesn’t… --- ## [Suggestion: Save Visible state for each child node](https://tech-community.robotics.abb.com/t/suggestion-save-visible-state-for-each-child-node/8042)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 1\ **Last updated:** [November 8, 2018, 1:06pm UTC](https://tech-community.robotics.abb.com/t/suggestion-save-visible-state-for-each-child-node/8042 "2018-11-08T13:06:55Z")
Hello, When we hide a child node, then hide its parent, re-enabling visibility of parent enable child too. This should not happens like that, the child should stay hidden. So a new sub-menu “show all child” have to be… --- ## [Suggestion: Collapse parent tree](https://tech-community.robotics.abb.com/t/suggestion-collapse-parent-tree/8038)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 3\ **Last updated:** [November 8, 2018, 1:03pm UTC](https://tech-community.robotics.abb.com/t/suggestion-collapse-parent-tree/8038 "2018-11-08T13:03:39Z")
Hello, I suggest in Components tree to collapse parent tree and select it, if you type left arrow key. And add sub-menu: “Collapse to parent” and “Collapse All”. Thanks. --- ## [Suggestion: Add tooltip on RobotApps widgets.](https://tech-community.robotics.abb.com/t/suggestion-add-tooltip-on-robotapps-widgets/7478)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 1\ **Last updated:** [November 8, 2018, 12:54pm UTC](https://tech-community.robotics.abb.com/t/suggestion-add-tooltip-on-robotapps-widgets/7478 "2018-11-08T12:54:29Z")
Hello, Could you add tooltip on each RobotApps widgets, like Add-ins, Component and other, reporting Description field? And add context menu with link to “https://robotapps.robotstudio.com/Details.aspx?fileId=XXXXXXXX” … --- ## [RS 6.06 & 6.07 with RW5.61: Visual SafeMove error when tooldata array defined.](https://tech-community.robotics.abb.com/t/rs-6-06-6-07-with-rw5-61-visual-safemove-error-when-tooldata-array-defined/8254)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 1\ **Last updated:** [November 8, 2018, 12:44pm UTC](https://tech-community.robotics.abb.com/t/rs-6-06-6-07-with-rw5-61-visual-safemove-error-when-tooldata-array-defined/8254 "2018-11-08T12:44:54Z")
Hello, When using tooldata array greater than 5 aggregates, Visual SafeMove doesn’t works. To reproduce: Create a new station with controller. RW: 5.61.08, IRB6700 150Kg 3.2m Check Customize options Create In DriveMo… --- ## [RS 6.07: Failed to create System from RW5 backup.](https://tech-community.robotics.abb.com/t/rs-6-07-failed-to-create-system-from-rw5-backup/8247)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 1\ **Last updated:** [November 8, 2018, 11:32am UTC](https://tech-community.robotics.abb.com/t/rs-6-07-failed-to-create-system-from-rw5-backup/8247 "2018-11-08T11:32:04Z")
Hello, When I create a new system from backup (RW 5.xx), Rs failed with: The system could not be created. The output frame show: Exception: FFFFFFFF : Unknown error (0xFFFFFFFF)RobInstallAPI error RobotStudio .NET e… --- ## [RS 6.07: Cannot import element name with STEP file.](https://tech-community.robotics.abb.com/t/rs-6-07-cannot-import-element-name-with-step-file/8250)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 4\ **Last updated:** [November 8, 2018, 11:02am UTC](https://tech-community.robotics.abb.com/t/rs-6-07-cannot-import-element-name-with-step-file/8250 "2018-11-08T11:02:10Z")
When I import STEP file, I’ve got this: With RS 6.06, this: --- ## [Wish: Master-Dongle](https://tech-community.robotics.abb.com/t/wish-master-dongle/8549)
**Author:** [@daniel72](https://tech-community.robotics.abb.com/u/daniel72)\ **Replies:** 0\ **Last updated:** [November 8, 2018, 10:33am UTC](https://tech-community.robotics.abb.com/t/wish-master-dongle/8549 "2018-11-08T10:33:23Z")
I wish for a USB master dongle. If this is in the control, then I always have write access in Robotstudio and after each boot a certain user is automatically assigned, in Robotstudio and in Flexpendant (e.g. the safety u… --- ## [Different types for GetParent and SetParent?](https://tech-community.robotics.abb.com/t/different-types-for-getparent-and-setparent/8511)
**Author:** [@Eandrju](https://tech-community.robotics.abb.com/u/Eandrju)\ **Replies:** 5\ **Last updated:** [October 22, 2018, 10:59am UTC](https://tech-community.robotics.abb.com/t/different-types-for-getparent-and-setparent/8511 "2018-10-22T10:59:25Z")
Hey, Im really struggling trying to set a parts parent. Why this type of a connection is impossible? Thanks --- ## [\[Wish\] RobotStudio Geometry: Toggle Visibility with space key](https://tech-community.robotics.abb.com/t/wish-robotstudio-geometry-toggle-visibility-with-space-key/8517)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 0\ **Last updated:** [October 17, 2018, 10:16am UTC](https://tech-community.robotics.abb.com/t/wish-robotstudio-geometry-toggle-visibility-with-space-key/8517 "2018-10-17T10:16:38Z")
Hello, Is it possible to toggle geometry Visible property of selected item with space key? --- ## [\[Wish\] RobotApps: Retrieve description](https://tech-community.robotics.abb.com/t/wish-robotapps-retrieve-description/8513)
**Author:** [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Replies:** 1\ **Last updated:** [October 17, 2018, 9:15am UTC](https://tech-community.robotics.abb.com/t/wish-robotapps-retrieve-description/8513 "2018-10-17T09:15:54Z")
In RobotApps, only ABB item have got description. In robotapps.robotstudio.com all item have description. Why not retrieve it from here? --- ## [Suggestion (or question): Copy/paste "target data"](https://tech-community.robotics.abb.com/t/suggestion-or-question-copy-paste-target-data/8507)
**Author:** [@DavidR](https://tech-community.robotics.abb.com/u/DavidR)\ **Replies:** 6\ **Last updated:** [October 11, 2018, 2:14pm UTC](https://tech-community.robotics.abb.com/t/suggestion-or-question-copy-paste-target-data/8507 "2018-10-11T14:14:07Z")
Hi Sometimes I miss the ability to copy and paste the position and rotation of a target in relation to it’s parent. Example: -Two identical fixtures Each has a wobj and a robtarget wFixt1 and pFixt1 (and wFixt2 and … [Previous page](https://tech-community.robotics.abb.com/c/robotstudio/upfeed/23.md?page=5) [Next page](https://tech-community.robotics.abb.com/c/robotstudio/upfeed/23.md?page=7)