# 3D Printing

**URL:** <https://tech-community.robotics.abb.com/t/3d-printing/10062>\
**Category:** RobotStudio\
**Tags:** 3dprinting\
**Created:** [March 16, 2021, 10:02am UTC](https://tech-community.robotics.abb.com/t/3d-printing/10062 "2021-03-16T10:02:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shuang](https://avatars.discourse-cdn.com/v4/letter/s/f08c70/32.png) [@Shuang](https://tech-community.robotics.abb.com/u/Shuang)\
**Post date:** [March 16, 2021, 10:02am UTC](https://tech-community.robotics.abb.com/t/3d-printing/10062/1 "2021-03-16T10:02:10Z")

</div>

Hello everyone,

does anyone know the difference between PrintL in 3D Printing Add-in and the normal MoveL command from the motion control perspective?

Thanks and Best Regards,  
Shuang

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [March 16, 2021, 10:32am UTC](https://tech-community.robotics.abb.com/t/3d-printing/10062/2 "2021-03-16T10:32:58Z")

</div>

Hi Shuang,

**PrintL** has built in functionality that can be used to communicate with an external control system.

The following signals are predefined:  
**aoTCP\_3DP** = The robot TCP speed.  
**goEvalue\_3DP** = Relative extrusion distance from the previous point (the E-value in the G-code).  
**doEquActive\_3DP** = Signal is high when the process is on. Can be used to turn on/off the external process equipment.

Except for the signals above, **PrintL** behaves as a **MoveL** instruction.

You can read more about this in the 3DP Application manual on page 49.
