# ABB Tool Library Request

**URL:** <https://tech-community.robotics.abb.com/t/abb-tool-library-request/6640>\
**Category:** RobotStudio\
**Created:** [May 20, 2015, 8:01am UTC](https://tech-community.robotics.abb.com/t/abb-tool-library-request/6640 "2015-05-20T08:01:21Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Neily03](https://avatars.discourse-cdn.com/v4/letter/n/c6cbf5/32.png) [@Neily03](https://tech-community.robotics.abb.com/u/Neily03)\
**Post date:** [May 20, 2015, 8:01am UTC](https://tech-community.robotics.abb.com/t/abb-tool-library-request/6640/1 "2015-05-20T08:01:21Z")

</div>

Hi,

I’m after an library or even just the geometry for an ABB Tool, its the AGMD spray gun on the 60degree single gun bracket, i’ve attached a photo.

Also i’ve noticed in each release of RS less and less paint tool libraries are being included, there is just one in RS6.01, are we paint robot users being phased out?

Thanks

Neil.

 ![Photo 20-05-2015 08 46 33.jpg](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/1X/1df51329a6242dd1285e61f0c8acfa08df282b21.jpeg)

---

<div class="post-metadata">

**Author:** ![Tormod](https://avatars.discourse-cdn.com/v4/letter/t/aca169/32.png) [@Tormod](https://tech-community.robotics.abb.com/u/Tormod)\
**Post date:** [May 20, 2015, 11:02am UTC](https://tech-community.robotics.abb.com/t/abb-tool-library-request/6640/2 "2015-05-20T11:02:05Z")

</div>

Hi Neily

The majority of the applicators are contained in the Painting Power-Pack.  
The applicator in question is however attached (had to zip the file because of type restrictions for attached files)  
Hope it was what you needed.

Best regards

Tormod Henne

Senior engineer  
[AGMD\_PRO\_A.zip](https://tech-community.robotics.abb.com/uploads/short-url/7XUeQvVIm04ZFiftvHcN0E9jnMW.zip) (850 KB)

---

<div class="post-metadata">

**Author:** ![Tormod](https://avatars.discourse-cdn.com/v4/letter/t/aca169/32.png) [@Tormod](https://tech-community.robotics.abb.com/u/Tormod)\
**Post date:** [May 20, 2015, 11:58am UTC](https://tech-community.robotics.abb.com/t/abb-tool-library-request/6640/3 "2015-05-20T11:58:01Z")

</div>

Also, let me leave this comment from our product office:

We do not intend to phase out painting tools in RS, the goal is to have the current portfolio of paint tools (gun and atomizer versions) avalable as models, the challenge is to also have older models/versions avalable. Some models are phased out as standard products but still valid/needed for some RS users.

Br TH

---

<div class="post-metadata">

**Author:** ![Neily03](https://avatars.discourse-cdn.com/v4/letter/n/c6cbf5/32.png) [@Neily03](https://tech-community.robotics.abb.com/u/Neily03)\
**Post date:** [May 20, 2015, 12:13pm UTC](https://tech-community.robotics.abb.com/t/abb-tool-library-request/6640/4 "2015-05-20T12:13:10Z")

</div>

Thanks Tormod but unfortunately that the incorrect tool, that the AGMD Pro, I’m after the standard AGMD.