# About Diagnositics analyse **URL:** \ **Category:** Robot Controller\ **Tags:** diagnostics\ **Created:** [January 28, 2022, 8:30am UTC](https://tech-community.robotics.abb.com/t/about-diagnositics-analyse/10557 "2022-01-28T08:30:12Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![barryjij](https://avatars.discourse-cdn.com/v4/letter/b/22d042/32.png) [@barryjij](https://tech-community.robotics.abb.com/u/barryjij)\ **Post date:** [January 28, 2022, 8:30am UTC](https://tech-community.robotics.abb.com/t/about-diagnositics-analyse/10557/1 "2022-01-28T08:30:12Z")
Hellow,Everyone: I get the diagnostics.log from a robot controller,in order to getting Baseboard temp,but there is three section recording the temprature in a file ![image.png](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/2X/a/a7bbfbfa6c283f8cf13c4aa61bc8826063d10923.png) ,I do not distinguish which is avaliable ,What are their different? ---
**Author:** ![lemster68](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/lemster68/32/1945_2.png) [@lemster68](https://tech-community.robotics.abb.com/u/lemster68)\ **Post date:** [January 28, 2022, 3:03pm UTC](https://tech-community.robotics.abb.com/t/about-diagnositics-analyse/10557/2 "2022-01-28T15:03:22Z")
I see only two. One specifically addresses the baseboard temp, which is what you stated you wanted. ---
**Author:** ![barryjij](https://avatars.discourse-cdn.com/v4/letter/b/22d042/32.png) [@barryjij](https://tech-community.robotics.abb.com/u/barryjij)\ **Post date:** [February 7, 2022, 1:49am UTC](https://tech-community.robotics.abb.com/t/about-diagnositics-analyse/10557/3 "2022-02-07T01:49:56Z")
I reconfirmed the other diagnostic file,I see three or four,It seems that each diagnostic file has a different number, why is it so? And which one does “One specifically addresses” mean?