# Add robot library to RobotStudio?

**URL:** <https://tech-community.robotics.abb.com/t/add-robot-library-to-robotstudio/10777>\
**Category:** RobotStudio\
**Created:** [June 23, 2022, 7:21am UTC](https://tech-community.robotics.abb.com/t/add-robot-library-to-robotstudio/10777 "2022-06-23T07:21:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ga\_esp](https://avatars.discourse-cdn.com/v4/letter/g/278dde/32.png) [@ga\_esp](https://tech-community.robotics.abb.com/u/ga_esp)\
**Post date:** [June 23, 2022, 7:21am UTC](https://tech-community.robotics.abb.com/t/add-robot-library-to-robotstudio/10777/1 "2022-06-23T07:21:03Z")

</div>

Hi.

I need to do a simulation with an IRB1300 10/1.15 and this robot model doesnt appear in the robot list when you create a new system.

First:

Where can i download the robot library for this model?

And then:

How can add this file to robotstudio?

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![graemepaulin](https://avatars.discourse-cdn.com/v4/letter/g/258eb7/32.png) [@graemepaulin](https://tech-community.robotics.abb.com/u/graemepaulin)\
**Post date:** [June 26, 2022, 11:40pm UTC](https://tech-community.robotics.abb.com/t/add-robot-library-to-robotstudio/10777/2 "2022-06-26T23:40:59Z")

</div>

How are you trying to create your system?

The IRB1300 10/1.15 appears in the list to create a new solution with virtual controller, is also in the ABB library list (on the home tab) if you create an empty station/solution…