# Addin: DXF Importer

**URL:** <https://tech-community.robotics.abb.com/t/addin-dxf-importer/10949>\
**Category:** RobotApps\
**Tags:** robotstudio-addin, add-in\
**Created:** [December 3, 2022, 11:09pm UTC](https://tech-community.robotics.abb.com/t/addin-dxf-importer/10949 "2022-12-03T23:09:45Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![revans](https://avatars.discourse-cdn.com/v4/letter/r/f4b2a3/32.png) [@revans](https://tech-community.robotics.abb.com/u/revans)\
**Post date:** [December 3, 2022, 11:09pm UTC](https://tech-community.robotics.abb.com/t/addin-dxf-importer/10949/1 "2022-12-03T23:09:45Z")

</div>

- This addin will import a DXF file into robot studio relative to the active work object as well as create a path following it if all shapes in it are closed shapes. This was built for the purpose of plasma cutting
- This can be installed in the addins page using the install package button
- If support is needed, ask for it on this page, I cannot guarantee future support.
- A video of its use is shown in this link [https://www.youtube.com/watch?v=nYjMB4DHNRA&t=676s](https://www.youtube.com/watch?v=nYjMB4DHNRA&t=676s)
- The rspak file can de downloaded at the following link. [YouTube Share files - Google Drive](https://drive.google.com/drive/folders/1ihDg-c3bQktodlVTHNWMpN9g6x0mN4B2)