# Additional ARC Systems  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/additional-arc-systems-arcwelding-powerpac/3317>\
**Category:** PowerPacs\
**Created:** [January 25, 2010, 9:50am UTC](https://tech-community.robotics.abb.com/t/additional-arc-systems-arcwelding-powerpac/3317 "2010-01-25T09:50:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bertie](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@Bertie](https://tech-community.robotics.abb.com/u/Bertie)\
**Post date:** [January 25, 2010, 9:50am UTC](https://tech-community.robotics.abb.com/t/additional-arc-systems-arcwelding-powerpac/3317/1 "2010-01-25T09:50:30Z")

</div>

Hello,  
I have a poroblem with AWPP and a System with additional ARC Systems.I canA’t create any Arc1 or Arc2 instructions.Is there a way to import process Definitons for this?

Best regards  
Bertie

---

<div class="post-metadata">

**Author:** ![Picard1de](https://avatars.discourse-cdn.com/v4/letter/p/3d9bf3/32.png) [@Picard1de](https://tech-community.robotics.abb.com/u/Picard1de)\
**Post date:** [January 29, 2010, 1:45pm UTC](https://tech-community.robotics.abb.com/t/additional-arc-systems-arcwelding-powerpac/3317/2 "2010-01-29T13:45:17Z")

</div>

Hello Bertie ,

You have to create a process template for the Arc1 and Arc2 process and put it in the process template folder. You also have to create a process defintion template for Arc1 and Arc2 and put it in the “RobotStudioProcessDefinition” folder under "Documents and Settings). Now you can import the process template in AWPP

BR

---

<div class="post-metadata">

**Author:** ![Bertie](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@Bertie](https://tech-community.robotics.abb.com/u/Bertie)\
**Post date:** [January 29, 2010, 2:06pm UTC](https://tech-community.robotics.abb.com/t/additional-arc-systems-arcwelding-powerpac/3317/3 "2010-01-29T14:06:50Z")

</div>

Thanks!