# Analog output to Smart component

**URL:** <https://tech-community.robotics.abb.com/t/analog-output-to-smart-component/3601>\
**Category:** RobotStudio\
**Created:** [May 25, 2010, 10:43am UTC](https://tech-community.robotics.abb.com/t/analog-output-to-smart-component/3601 "2010-05-25T10:43:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Laro88](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/laro88/32/2653_2.png) [@Laro88](https://tech-community.robotics.abb.com/u/Laro88)\
**Post date:** [May 25, 2010, 10:43am UTC](https://tech-community.robotics.abb.com/t/analog-output-to-smart-component/3601/1 "2010-05-25T10:43:04Z")

</div>

In RS, how do I bind an analog output to a motion in a smart component?

Sorry, it might be trivial, but there are so many buttons, features & quircks in the smart components, that I think you have to be a developer to:

A: Understand the philosophy of the smart components and their use and limitations.  
B: Troubleshoot it when it does not behave as expected.

Regards  
Laro88