# Application Spot Welding is not functioning

**URL:** <https://tech-community.robotics.abb.com/t/application-spot-welding-is-not-functioning/9186>\
**Category:** RobotStudio\
**Created:** [November 3, 2019, 3:56am UTC](https://tech-community.robotics.abb.com/t/application-spot-welding-is-not-functioning/9186 "2019-11-03T03:56:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![eKoh](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/ekoh/32/2649_2.png) [@eKoh](https://tech-community.robotics.abb.com/u/eKoh)\
**Post date:** [November 3, 2019, 3:56am UTC](https://tech-community.robotics.abb.com/t/application-spot-welding-is-not-functioning/9186/1 "2019-11-03T03:56:23Z")

</div>

Hi! I want to work with the Spot welding technology.

But as I added this technology and had a Warm start.

 ![image.png](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/1X/c11608f6dd1758d181ced9ff229eb9848e3e8a0e.png)

The “Processes” tab in Configuration tab doesn’t appear. Neither the SWUSER module appears.

 ![image.png](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/1X/25e9366bfaa3ac8e88a2a7b4a0bb0b8261f947d7.png)  
I don’t know what I am missing here. Btw this is the first time I do it for Spot welding, I have done this with Dispensing and AW before with no issue.

I am using RS 6.08.

Thank you for helping!

---

<div class="post-metadata">

**Author:** ![Johannes\_Weiman](https://avatars.discourse-cdn.com/v4/letter/j/e47c2d/32.png) [@Johannes\_Weiman](https://tech-community.robotics.abb.com/u/Johannes_Weiman)\
**Post date:** [November 4, 2019, 7:48am UTC](https://tech-community.robotics.abb.com/t/application-spot-welding-is-not-functioning/9186/2 "2019-11-04T07:48:29Z")

</div>

I think you also must add one of the options Spot Pneumatic, Spot Servo or Spot Servo Equalizing.