# Arc welding powerpac 6.06

**URL:** <https://tech-community.robotics.abb.com/t/arc-welding-powerpac-6-06/8237>\
**Category:** PowerPacs\
**Created:** [May 15, 2018, 2:27pm UTC](https://tech-community.robotics.abb.com/t/arc-welding-powerpac-6-06/8237 "2018-05-15T14:27:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wittertom127](https://avatars.discourse-cdn.com/v4/letter/w/ad7895/32.png) [@Wittertom127](https://tech-community.robotics.abb.com/u/Wittertom127)\
**Post date:** [May 15, 2018, 2:27pm UTC](https://tech-community.robotics.abb.com/t/arc-welding-powerpac-6-06/8237/1 "2018-05-15T14:27:21Z")

</div>

I have just downloaded RS 6.07 and arc welding powerpac 6.06.

I am getting errors on every tab and the arc welding browser pane is missing? The power pac seems to load, but when I click on the arc welding tab I get, “Arc welding method not found”.

I have used RS 5.6 with powerpac with no problems.

Any ideas how I can fix this please.

---

<div class="post-metadata">

**Author:** ![KgaOfflineCenter](https://avatars.discourse-cdn.com/v4/letter/k/3bc359/32.png) [@KgaOfflineCenter](https://tech-community.robotics.abb.com/u/KgaOfflineCenter)\
**Post date:** [May 17, 2018, 6:05am UTC](https://tech-community.robotics.abb.com/t/arc-welding-powerpac-6-06/8237/2 "2018-05-17T06:05:10Z")

</div>

I have the same problem. AWPP 6.06 does not work with RS 6.07. ABB has to release a new AWPP.

---

<div class="post-metadata">

**Author:** ![Manjunatha](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/manjunatha/32/2894_2.png) [@Manjunatha](https://tech-community.robotics.abb.com/u/Manjunatha)\
**Post date:** [May 22, 2018, 8:21am UTC](https://tech-community.robotics.abb.com/t/arc-welding-powerpac-6-06/8237/3 "2018-05-22T08:21:24Z")

</div>

AWPP 6.07 is available in the download center. [Downloads | ABB](http://new.abb.com/products/robotics/robotstudio/downloads)

Please download and check the functionalities.