# ArcWeld PowerPac 5.07 is now released!  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/arcweld-powerpac-5-07-is-now-released-arcwelding-powerpac/654>\
**Category:** PowerPacs\
**Created:** [March 13, 2006, 9:56am UTC](https://tech-community.robotics.abb.com/t/arcweld-powerpac-5-07-is-now-released-arcwelding-powerpac/654 "2006-03-13T09:56:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fredrik\_Syr](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/fredrik_syr/32/3134_2.png) [@Fredrik\_Syr](https://tech-community.robotics.abb.com/u/Fredrik_Syr)\
**Post date:** [March 13, 2006, 9:56am UTC](https://tech-community.robotics.abb.com/t/arcweld-powerpac-5-07-is-now-released-arcwelding-powerpac/654/1 "2006-03-13T09:56:21Z")

</div>

Dear RobotStudio ArcWeld PowerPac Users,

We are proud to announce the release of ArcWeld PowerPac 5.07.

The software can be downloaded from ABB Library/SolutionsBank and from the Software Subscription Service Portal.

Note: Requires that you have RobotStudio 5.07 installed.

Kind Regards  
Fredrik