# ArcWeld PowerPac SP1 is released!  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/arcweld-powerpac-sp1-is-released-arcwelding-powerpac/1736>\
**Category:** PowerPacs\
**Created:** [March 11, 2008, 3:29pm UTC](https://tech-community.robotics.abb.com/t/arcweld-powerpac-sp1-is-released-arcwelding-powerpac/1736 "2008-03-11T15:29:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [March 11, 2008, 3:29pm UTC](https://tech-community.robotics.abb.com/t/arcweld-powerpac-sp1-is-released-arcwelding-powerpac/1736/1 "2008-03-11T15:29:03Z")

</div>

Dear ArcWeld PowerPac users,

ArcWeld PowerPac 5.10 Service Pack 1 is now available for download. It contains a fix for a problem related to import of Instruction Templates. No new license is required as ArcWeld PowerPac 5.10 SP1 uses the same license as ArcWeld PowerPac 5.10.

ArcWeld PowerPac users with an active subscription can download ArcWeldPowerPac 5.10 SP1 from ABB SolutionsBank at [http://solutionsbank.abb.com](http://solutionsbank.abb.com) (ABB internal users: ABB Library at [Sign in to your account](http://inside.abb.com/library)).

For installation instructions and more information please see the Release Notes for ArcWeldPowerPac 5.10 SP1.

Kind regards,

---

<div class="post-metadata">

**Author:** ![JEFFGINN](https://avatars.discourse-cdn.com/v4/letter/j/ecae2f/32.png) [@JEFFGINN](https://tech-community.robotics.abb.com/u/JEFFGINN)\
**Post date:** [April 15, 2008, 1:35pm UTC](https://tech-community.robotics.abb.com/t/arcweld-powerpac-sp1-is-released-arcwelding-powerpac/1736/2 "2008-04-15T13:35:24Z")

</div>

Hi,

I am having problems with weld templates in arcweld. I have set up some weld templates which worked fine in version 5.9, but does not work in 5.10.

I loaded SP1 hoping it might solve the problem but no joy.

anybody any ideas?

Thanks,

Jed Ginnever - farrel ltd