# ArcWelding 6.0 cannot load

**URL:** <https://tech-community.robotics.abb.com/t/arcwelding-6-0-cannot-load/6671>\
**Category:** PowerPacs\
**Created:** [June 18, 2015, 8:32am UTC](https://tech-community.robotics.abb.com/t/arcwelding-6-0-cannot-load/6671 "2015-06-18T08:32:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![WuYue](https://avatars.discourse-cdn.com/v4/letter/w/bb73d2/32.png) [@WuYue](https://tech-community.robotics.abb.com/u/WuYue)\
**Post date:** [June 18, 2015, 8:32am UTC](https://tech-community.robotics.abb.com/t/arcwelding-6-0-cannot-load/6671/1 "2015-06-18T08:32:52Z")

</div>

Hi, Exports,

My Robotstudio is 5.61.02. I have installed ArcWelding 6.0. However, when double click the icon in the PowerPacs group, it does not load the ArcWelding powerpac in the riboon. If I use right click on the icon, the loading add-in is grey.

Thanks for your help!

---

<div class="post-metadata">

**Author:** ![vineetjaveri](https://avatars.discourse-cdn.com/v4/letter/v/9fc29f/32.png) [@vineetjaveri](https://tech-community.robotics.abb.com/u/vineetjaveri)\
**Post date:** [July 15, 2015, 8:47am UTC](https://tech-community.robotics.abb.com/t/arcwelding-6-0-cannot-load/6671/2 "2015-07-15T08:47:52Z")

</div>

Hi.

ArcWelding 6.0 requires Robotstudio 6.0 or higher to be loaded.

Regards Vineet Javeri

---

<div class="post-metadata">

**Author:** ![WuYue](https://avatars.discourse-cdn.com/v4/letter/w/bb73d2/32.png) [@WuYue](https://tech-community.robotics.abb.com/u/WuYue)\
**Post date:** [August 3, 2015, 8:03am UTC](https://tech-community.robotics.abb.com/t/arcwelding-6-0-cannot-load/6671/3 "2015-08-03T08:03:45Z")

</div>

Hi, Vineetjaveri, Thanks for your answer! Does any one knows where to download ArcWelding 5.61?