# ArcWelding PowerPac 6.05 doesn't work

**URL:** <https://tech-community.robotics.abb.com/t/arcwelding-powerpac-6-05-doesnt-work/7842>\
**Category:** UpFeed\
**Created:** [August 7, 2017, 6:26pm UTC](https://tech-community.robotics.abb.com/t/arcwelding-powerpac-6-05-doesnt-work/7842 "2017-08-07T18:26:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![KgaOfflineCenter](https://avatars.discourse-cdn.com/v4/letter/k/3bc359/32.png) [@KgaOfflineCenter](https://tech-community.robotics.abb.com/u/KgaOfflineCenter)\
**Post date:** [August 7, 2017, 6:26pm UTC](https://tech-community.robotics.abb.com/t/arcwelding-powerpac-6-05-doesnt-work/7842/1 "2017-08-07T18:26:02Z")

</div>

It is not possible to jump or move to robtargets.

---

<div class="post-metadata">

**Author:** ![Adnan](https://avatars.discourse-cdn.com/v4/letter/a/f19dbf/32.png) [@Adnan](https://tech-community.robotics.abb.com/u/Adnan)\
**Post date:** [September 28, 2017, 1:34pm UTC](https://tech-community.robotics.abb.com/t/arcwelding-powerpac-6-05-doesnt-work/7842/2 "2017-09-28T13:34:05Z")

</div>

Do you experience some kind of error?

---

<div class="post-metadata">

**Author:** ![MYakawich](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@MYakawich](https://tech-community.robotics.abb.com/u/MYakawich)\
**Post date:** [October 17, 2017, 6:39pm UTC](https://tech-community.robotics.abb.com/t/arcwelding-powerpac-6-05-doesnt-work/7842/3 "2017-10-17T18:39:08Z")

</div>

Agreed. 6.04.01 with AWPP 6.04 is what we’ve reverted back to.