# Array of robtargets

**URL:** https://tech-community.robotics.abb.com/t/array-of-robtargets/5132
**Category:** RobotStudio
**Created:** [October 16, 2012, 4:47pm UTC](https://tech-community.robotics.abb.com/t/array-of-robtargets/5132 "2012-10-16T16:47:15Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![peterax](https://avatars.discourse-cdn.com/v4/letter/p/b5a626/32.png) [@peterax](https://tech-community.robotics.abb.com/u/peterax)
#### Post date: [October 16, 2012, 4:47pm UTC](https://tech-community.robotics.abb.com/t/array-of-robtargets/5132/1 "2012-10-16T16:47:15Z")

</div>

Hi,  
I have a system which uses an array of robtargets. It’s running just fine but when I restored it into my RS station, I can’t Sync To Station. It won’t sync the procedures containing a Move instruction to an array element (ie MoveJ targetArray{1},…).

Is it a bug or a feature? 😉

/P

---

<div class="post-metadata">

### Author: ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)
#### Post date: [October 18, 2012, 8:39am UTC](https://tech-community.robotics.abb.com/t/array-of-robtargets/5132/2 "2012-10-18T08:39:23Z")

</div>

The grapical environment of RobotStudio does not support arrays of robtargets. You can exeute the programs and edit the RAPID code, but not Synchronize to station and edit graphically.