# Assembling imported STEP files using RobotStudio Add-in

**URL:** <https://tech-community.robotics.abb.com/t/assembling-imported-step-files-using-robotstudio-add-in/8427>\
**Category:** Developer Tools\
**Created:** [August 24, 2018, 12:22pm UTC](https://tech-community.robotics.abb.com/t/assembling-imported-step-files-using-robotstudio-add-in/8427 "2018-08-24T12:22:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Vinoth136](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/vinoth136/32/3389_2.png) [@Vinoth136](https://tech-community.robotics.abb.com/u/Vinoth136)\
**Post date:** [August 24, 2018, 12:22pm UTC](https://tech-community.robotics.abb.com/t/assembling-imported-step-files-using-robotstudio-add-in/8427/1 "2018-08-24T12:22:04Z")

</div>

Hi everyone,

Is there is any possibilities to create Add-in, which helps to assemble the imported STEP files in RobotStudio environment.

1. I select a point on a face of Part 1.
2. Then, I transform part 2 to the point on part 1.
3. After transforming the part2, I see the part 2 origin and the selected point of part 1 is same.

I need guidance on: check the faces of 2 parts, then transform and orientate the part2 based on face of part1, (assembling operation like SOLIDWORKS )

Thanks in advance.

 ![image.png](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/2X/a/a6c7183edcf9a50cff02467225cee80c458a6d7b.png)

 ![image.png](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/2X/5/58579f78eda2452e52fed6d587ddd2ef27a32b40.png)