# Attachment to parts.

**URL:** <https://tech-community.robotics.abb.com/t/attachment-to-parts/404>\
**Category:** RobotStudio S4\
**Created:** [June 30, 2005, 9:03am UTC](https://tech-community.robotics.abb.com/t/attachment-to-parts/404 "2005-06-30T09:03:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Klaus](https://avatars.discourse-cdn.com/v4/letter/k/e99b99/32.png) [@Klaus](https://tech-community.robotics.abb.com/u/Klaus)\
**Post date:** [June 30, 2005, 9:03am UTC](https://tech-community.robotics.abb.com/t/attachment-to-parts/404/1 "2005-06-30T09:03:53Z")

</div>

Hey there.

I have tried to attached a FIX tool to a part but it wont work.

I am designing a cell with a polish mascine with severel tools and i use fixed tool and robhold Wobj.

Is it posible to attached the fixed tool to the part so i don’t have to move both part and my 4 tools while designing my cell.

Best regards Klaus.

---

<div class="post-metadata">

**Author:** ![Thomas](https://avatars.discourse-cdn.com/v4/letter/t/e36b37/32.png) [@Thomas](https://tech-community.robotics.abb.com/u/Thomas)\
**Post date:** [July 4, 2005, 1:37pm UTC](https://tech-community.robotics.abb.com/t/attachment-to-parts/404/2 "2005-07-04T13:37:54Z")

</div>

Hey Klaus,

It would be a lot easier to answer your question if we can have a look at your station.

Please send a copy of your station to the support e-mail address.:stuck\_out\_tongue\_winking\_eye: