# auto path configuration

**URL:** https://tech-community.robotics.abb.com/t/auto-path-configuration/2812
**Category:** RobotStudio
**Created:** [May 29, 2009, 4:44pm UTC](https://tech-community.robotics.abb.com/t/auto-path-configuration/2812 "2009-05-29T16:44:57Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![sturner](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/sturner/32/3432_2.png) [@sturner](https://tech-community.robotics.abb.com/u/sturner)
#### Post date: [May 29, 2009, 4:44pm UTC](https://tech-community.robotics.abb.com/t/auto-path-configuration/2812/1 "2009-05-29T16:44:57Z")

</div>

Hi

Should ‘auto path configuration’ work when the targets in a path are not connected to the same workobject?

Easy to work around the problem, I.E. temporarily drag and drop to the same workobject and then once configured move back.

Thanks in advance for any advice