AutoConfiguration with External Axis

RobotStudio
1

Does the AutoConfiguration work when using the an External Axis (L type positioner)

The VC is correctly configured and robot coordinates ok when all targets are manually configured one at a time, but the AutoConfiguration of the path only seems to move the robot and not the positioner.

FYI: ActUnit, is used within the path, and I also have the ArcWeld PowerPac open but prefer not to use the configuration tool within this.

Many thanks

2

Unfortunately not, but it is high on the “todo” list for 5.12.

regards, Johannes

3

Hi Sturner,

Unfortunately does AutoConfiguration not support positioners. See Release Notes page 22.
We know this is a limitation and are working on a solution.