# AWPP 5.14.03 Bug  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/awpp-5-14-03-bug-arcwelding-powerpac/4873>\
**Category:** PowerPacs\
**Created:** [May 17, 2012, 6:20pm UTC](https://tech-community.robotics.abb.com/t/awpp-5-14-03-bug-arcwelding-powerpac/4873 "2012-05-17T18:20:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MYakawich](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@MYakawich](https://tech-community.robotics.abb.com/u/MYakawich)\
**Post date:** [May 17, 2012, 6:20pm UTC](https://tech-community.robotics.abb.com/t/awpp-5-14-03-bug-arcwelding-powerpac/4873/1 "2012-05-17T18:20:54Z")

</div>

ArcWeld → Templates → Tool Properties doesn’t seen to be working correctly. It prevents the user from clicking on geometry within the virtual station.

---

<div class="post-metadata">

**Author:** ![Manny\_Jiang](https://avatars.discourse-cdn.com/v4/letter/m/bbce88/32.png) [@Manny\_Jiang](https://tech-community.robotics.abb.com/u/Manny_Jiang)\
**Post date:** [June 8, 2012, 8:34am UTC](https://tech-community.robotics.abb.com/t/awpp-5-14-03-bug-arcwelding-powerpac/4873/2 "2012-06-08T08:34:05Z")

</div>

Thank you MYakawich for reporting!  
Development team also just noticed it and has fixed it. It will be in the next release with other amendments.  
Sorry for the inconvenience!