# Block Buttons

**URL:** <https://tech-community.robotics.abb.com/t/block-buttons/3393>\
**Category:** ScreenMaker\
**Created:** [February 28, 2010, 5:35pm UTC](https://tech-community.robotics.abb.com/t/block-buttons/3393 "2010-02-28T17:35:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jjsg](https://avatars.discourse-cdn.com/v4/letter/j/a88e4f/32.png) [@jjsg](https://tech-community.robotics.abb.com/u/jjsg)\
**Post date:** [February 28, 2010, 5:35pm UTC](https://tech-community.robotics.abb.com/t/block-buttons/3393/1 "2010-02-28T17:35:59Z")

</div>

Hello;

Is possible block some functions/buttons in auto.

Like if i have a button that setup one output, and I want do that only if the Robot is in manual mode.

Best Regards:

JosAc GonA?alves

---

<div class="post-metadata">

**Author:** ![SriniP](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@SriniP](https://tech-community.robotics.abb.com/u/SriniP)\
**Post date:** [March 1, 2010, 6:03am UTC](https://tech-community.robotics.abb.com/t/block-buttons/3393/2 "2010-03-01T06:03:35Z")

</div>

Hello:

You can use the IO system signal for manual mode ( AUTO / MANUAL) to enable & disable controls.

Best Regards,

Srini

---

<div class="post-metadata">

**Author:** ![jjsg](https://avatars.discourse-cdn.com/v4/letter/j/a88e4f/32.png) [@jjsg](https://tech-community.robotics.abb.com/u/jjsg)\
**Post date:** [March 2, 2010, 8:55pm UTC](https://tech-community.robotics.abb.com/t/block-buttons/3393/3 "2010-03-02T20:55:06Z")

</div>

OK

ItA’s Workinkg.

JG  
[webwiz/1047/Bloquear\_ButA?es\_Em\_Modo\_AutomA?tico.JPG](http://forums.robotstudio.com/webwiz/1047/Bloquear_ButA?es_Em_Modo_AutomA?tico.JPG)