# CAD files for Getting started with RobotStudio in 30 Minutes Online tutorials

**URL:** <https://tech-community.robotics.abb.com/t/cad-files-for-getting-started-with-robotstudio-in-30-minutes-online-tutorials/7782>\
**Category:** RobotStudio\
**Tags:** robotstudio\
**Created:** [June 26, 2017, 3:53pm UTC](https://tech-community.robotics.abb.com/t/cad-files-for-getting-started-with-robotstudio-in-30-minutes-online-tutorials/7782 "2017-06-26T15:53:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Richard\_Ramos](https://avatars.discourse-cdn.com/v4/letter/r/4bbf92/32.png) [@Richard\_Ramos](https://tech-community.robotics.abb.com/u/Richard_Ramos)\
**Post date:** [June 26, 2017, 3:53pm UTC](https://tech-community.robotics.abb.com/t/cad-files-for-getting-started-with-robotstudio-in-30-minutes-online-tutorials/7782/1 "2017-06-26T15:53:06Z")

</div>

A customer has requested the table.sat and engine\_block.sat CAD files as shown in tutorials 1-5. Does anyone have a copy that I can give?

---

<div class="post-metadata">

**Author:** ![Maxim](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/maxim/32/4429_2.png) [@Maxim](https://tech-community.robotics.abb.com/u/Maxim)\
**Post date:** [November 19, 2021, 10:12am UTC](https://tech-community.robotics.abb.com/t/cad-files-for-getting-started-with-robotstudio-in-30-minutes-online-tutorials/7782/2 "2021-11-19T10:12:59Z")

</div>

You can find them here: [ABB Robotics Community - Maintenance](https://forums.robotstudio.com/discussion/13184/getting-started-tutorial-4-objects)