# Can I use Fusion 360 to Program ABB Robot? **URL:** \ **Category:** Robot Controller\ **Created:** [September 7, 2018, 6:55am UTC](https://tech-community.robotics.abb.com/t/can-i-use-fusion-360-to-program-abb-robot/8451 "2018-09-07T06:55:08Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![HossamElaarag](https://avatars.discourse-cdn.com/v4/letter/h/858c86/32.png) [@HossamElaarag](https://tech-community.robotics.abb.com/u/HossamElaarag)\ **Post date:** [September 7, 2018, 6:55am UTC](https://tech-community.robotics.abb.com/t/can-i-use-fusion-360-to-program-abb-robot/8451/1 "2018-09-07T06:55:08Z")
If I use Fusion 360 to create a program to do machinary process on apart, Can I transfer this program to ABB Robot and run it? Thank you ---
**Author:** ![Dmitry](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@Dmitry](https://tech-community.robotics.abb.com/u/Dmitry)\ **Post date:** [September 18, 2018, 7:42am UTC](https://tech-community.robotics.abb.com/t/can-i-use-fusion-360-to-program-abb-robot/8451/2 "2018-09-18T07:42:33Z")
Check the Machining powerpac. It’s an add-on for robotstudio. you can download it here - [Downloads | ABB](https://new.abb.com/products/robotics/robotstudio/downloads) Short desription - [RobotStudio Machining PowerPac | ABB](https://new.abb.com/products/robotics/application-software/machining/robotstudio-machining-powerpac) ---
**Author:** ![Popex](https://avatars.discourse-cdn.com/v4/letter/p/91b2a8/32.png) [@Popex](https://tech-community.robotics.abb.com/u/Popex)\ **Post date:** [December 13, 2018, 10:14pm UTC](https://tech-community.robotics.abb.com/t/can-i-use-fusion-360-to-program-abb-robot/8451/3 "2018-12-13T22:14:38Z")
Escribe tu comentarioHello, you can use PowerMILL Robot to perform complex machining paths, and execute them with a Robot. It has the library of the main robot manufacturers. [https://manufacturing.autodesk.com/solutions/robotics/](https://manufacturing.autodesk.com/solutions/robotics/) regards Pablo Figueredo