# Can\`t find ArcMoveL in Arcwelding Powerpac.  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/can-t-find-arcmovel-in-arcwelding-powerpac-arcwelding-powerpac/4385>\
**Category:** PowerPacs\
**Created:** [September 1, 2011, 8:41am UTC](https://tech-community.robotics.abb.com/t/can-t-find-arcmovel-in-arcwelding-powerpac-arcwelding-powerpac/4385 "2011-09-01T08:41:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SAR35008-1](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@SAR35008-1](https://tech-community.robotics.abb.com/u/SAR35008-1)\
**Post date:** [September 1, 2011, 8:41am UTC](https://tech-community.robotics.abb.com/t/can-t-find-arcmovel-in-arcwelding-powerpac-arcwelding-powerpac/4385/1 "2011-09-01T08:41:15Z")

</div>

hi,

_Programming RW Arc in synchronized mode with instruction IDs requires some_  
_special considerations for the error handling to work correctly. In the none-welding robot or_  
_external axis, some new instructions must be used when there are corresponding weld_  
_instructions in the welding robots._ (Operating Manual - ArcWelding PowerPac)

But I can`t find the instruction “ **ArcMoveL** ” in ArcWelding PowerPac.  
The instruction is already present in the robot.

Thanks for your help!

---

<div class="post-metadata">

**Author:** ![jarmster](https://avatars.discourse-cdn.com/v4/letter/j/958977/32.png) [@jarmster](https://tech-community.robotics.abb.com/u/jarmster)\
**Post date:** [September 25, 2011, 8:11pm UTC](https://tech-community.robotics.abb.com/t/can-t-find-arcmovel-in-arcwelding-powerpac-arcwelding-powerpac/4385/2 "2011-09-25T20:11:39Z")

</div>

when you create the weld you need to change the process template from process as move to arc default.

you would think that an official abb forum would have more moderators. its really quite pathetic.