# Cognex Visual Suite Cameras compatibility update for Integrated Vision

**URL:** <https://tech-community.robotics.abb.com/t/cognex-visual-suite-cameras-compatibility-update-for-integrated-vision/14844>\
**Category:** Collaborative Robots\
**Created:** [March 6, 2026, 1:08pm UTC](https://tech-community.robotics.abb.com/t/cognex-visual-suite-cameras-compatibility-update-for-integrated-vision/14844 "2026-03-06T13:08:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RH\_Saar](https://avatars.discourse-cdn.com/v4/letter/r/ba9def/32.png) [@RH\_Saar](https://tech-community.robotics.abb.com/u/RH_Saar)\
**Post date:** [March 6, 2026, 1:08pm UTC](https://tech-community.robotics.abb.com/t/cognex-visual-suite-cameras-compatibility-update-for-integrated-vision/14844/1 "2026-03-06T13:08:06Z")

</div>

I would like to ask if Integrated Vision will get update to Cognex Visual Suite Cameras like **In-Sight 3800, In-Sight 8900.**

I can connect In-Sight 2800 to Internal Network and Integrated Vision find the camera immediately.

When I connect In-Sight 3800 to Internal Network Robot system gets 20676 Unexpected software Error and Omnicore gets System Failure state.

Robot is GOFA 15000-101537. I instaled lates firmaware to Omnicore