# Configuring the IRC5 OPC Server for communication with robots in other subnets.

**URL:** <https://tech-community.robotics.abb.com/t/configuring-the-irc5-opc-server-for-communication-with-robots-in-other-subnets/6586>\
**Category:** Robot Controller\
**Created:** [April 13, 2015, 12:14pm UTC](https://tech-community.robotics.abb.com/t/configuring-the-irc5-opc-server-for-communication-with-robots-in-other-subnets/6586 "2015-04-13T12:14:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lucke](https://avatars.discourse-cdn.com/v4/letter/l/ecae2f/32.png) [@Lucke](https://tech-community.robotics.abb.com/u/Lucke)\
**Post date:** [April 13, 2015, 12:14pm UTC](https://tech-community.robotics.abb.com/t/configuring-the-irc5-opc-server-for-communication-with-robots-in-other-subnets/6586/1 "2015-04-13T12:14:35Z")

</div>

Hello!

According to the release notes for the IRC5 OPC Server 6.00.01 there may exist a workaround solution to enable communication with robots from other subnets.  
If anyone here knows how this can be performed, then I’m interested to take part of that experience!

Thanks in advance!

Best Regards  
Lucas  
[Release Notes OPC Server 6.00.01.pdf](https://tech-community.robotics.abb.com/uploads/short-url/qSpPLSEgOP9GcEfu7Qfd3XOubL4.pdf) (467 KB)