# conveyor Tracking

**URL:** <https://tech-community.robotics.abb.com/t/conveyor-tracking/208>\
**Category:** RobotStudio S4\
**Created:** [September 23, 2004, 6:58pm UTC](https://tech-community.robotics.abb.com/t/conveyor-tracking/208 "2004-09-23T18:58:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/system/32/6_2.png) [@system](https://tech-community.robotics.abb.com/u/system)\
**Post date:** [September 23, 2004, 6:58pm UTC](https://tech-community.robotics.abb.com/t/conveyor-tracking/208/1 "2004-09-23T18:58:40Z")

</div>

:star:

Hello

Anybody knows how configure correctly conveyor tracking in robot studio 3.1, because I need to simulate paint and IRB robots in tracking. I try several times but in the manual there is not information about this

Bye

---

<div class="post-metadata">

**Author:** ![John\_Wiberg](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/john_wiberg/32/1485_2.png) [@John\_Wiberg](https://tech-community.robotics.abb.com/u/John_Wiberg)\
**Post date:** [September 24, 2004, 10:01am UTC](https://tech-community.robotics.abb.com/t/conveyor-tracking/208/2 "2004-09-24T10:01:13Z")

</div>

Hmm, haven’t set it up myself but there is definately topics in the help about it.

Go into the Help file and click the search tab, write in conveyor and hit enter.