# Create a Solution from RAPID Modules

**URL:** https://tech-community.robotics.abb.com/t/create-a-solution-from-rapid-modules/10183
**Category:** RobotStudio
**Created:** [May 14, 2021, 4:28pm UTC](https://tech-community.robotics.abb.com/t/create-a-solution-from-rapid-modules/10183 "2021-05-14T16:28:10Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![T800\_412](https://avatars.discourse-cdn.com/v4/letter/t/258eb7/32.png) [@T800\_412](https://tech-community.robotics.abb.com/u/T800_412)
#### Post date: [May 14, 2021, 4:28pm UTC](https://tech-community.robotics.abb.com/t/create-a-solution-from-rapid-modules/10183/1 "2021-05-14T16:28:10Z")

</div>

Is there a way to create a RobotStudio Solution using RAPID modules? I have several indivudal modules which all go to the same robot, but no solution which allows me to view the robot in modeling or simulation.

I’m still new and learning ABB by going through the manuals and online tutorials.

---

<div class="post-metadata">

### Author: ![jmf](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/jmf/32/762_2.png) [@jmf](https://tech-community.robotics.abb.com/u/jmf)
#### Post date: [May 14, 2021, 5:04pm UTC](https://tech-community.robotics.abb.com/t/create-a-solution-from-rapid-modules/10183/2 "2021-05-14T17:04:12Z")

</div>

Do you have a backup of the system? If you do you can create a station from the backup which will then load all relevant stuff in when correct.

---

<div class="post-metadata">

### Author: ![lemster68](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/lemster68/32/1945_2.png) [@lemster68](https://tech-community.robotics.abb.com/u/lemster68)
#### Post date: [May 14, 2021, 5:12pm UTC](https://tech-community.robotics.abb.com/t/create-a-solution-from-rapid-modules/10183/3 "2021-05-14T17:12:56Z")

</div>

Make your own solution which matches the real robot, then load those modules.