# Create page whit User LogIn

**URL:** <https://tech-community.robotics.abb.com/t/create-page-whit-user-login/15043>\
**Category:** AppStudio\
**Created:** [July 2, 2026, 11:15am UTC](https://tech-community.robotics.abb.com/t/create-page-whit-user-login/15043 "2026-07-02T11:15:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alessandro\_Segato](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@Alessandro\_Segato](https://tech-community.robotics.abb.com/u/Alessandro_Segato)\
**Post date:** [July 2, 2026, 11:15am UTC](https://tech-community.robotics.abb.com/t/create-page-whit-user-login/15043/1 "2026-07-02T11:15:29Z")

</div>

Good morning, I’d like to create a page where I can log in by selecting a username and setting a password without going through the standard Flex app screen.  
I only found instructions on App Studio for viewing the logged-in user, but no instructions for writing and setting it.

---

<div class="post-metadata">

**Author:** ![yitong](https://avatars.discourse-cdn.com/v4/letter/y/3da27b/32.png) [@yitong](https://tech-community.robotics.abb.com/u/yitong)\
**Post date:** [July 3, 2026, 2:13am UTC](https://tech-community.robotics.abb.com/t/create-page-whit-user-login/15043/2 "2026-07-03T02:13:07Z")

</div>

😃

AppStudio v1.3.0 doesn’t currently support multi-page apps. For your use case, though, you can create a login dialog or modal that blocks user interaction until valid login credentials are entered. You can do this using the HTML Code (add a html element to the `document.body`) and the page component’s `onMounted` event.

This is a simplest and stable workaround…

 ![image](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/2X/4/4e87141f31c54aefd28a91686ff51df21ad0c80c.png)