# Create WobJ

**URL:** <https://tech-community.robotics.abb.com/t/create-wobj/7837>\
**Category:** RobotStudio\
**Tags:** robotstudio, rapid, flexpendant, robtarget, workobject\
**Created:** [July 31, 2017, 7:59am UTC](https://tech-community.robotics.abb.com/t/create-wobj/7837 "2017-07-31T07:59:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Samucha](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@Samucha](https://tech-community.robotics.abb.com/u/Samucha)\
**Post date:** [July 31, 2017, 7:59am UTC](https://tech-community.robotics.abb.com/t/create-wobj/7837/1 "2017-07-31T07:59:52Z")

</div>

Hi.All

Possible if create work object without Flexpendant?

How if possible?

Thanks you.

---

<div class="post-metadata">

**Author:** ![ko414du4](https://avatars.discourse-cdn.com/v4/letter/k/e19b73/32.png) [@ko414du4](https://tech-community.robotics.abb.com/u/ko414du4)\
**Post date:** [July 31, 2017, 10:11am UTC](https://tech-community.robotics.abb.com/t/create-wobj/7837/2 "2017-07-31T10:11:44Z")

</div>

Yes via RobotStudio:

- Create it on your station
- Transfer it to your virtual system
- Copy the definition of the new wobj from the virtual system to the real controller. You need to be connected to the IRC5 to do this either from service point or LAN.

---

<div class="post-metadata">

**Author:** ![Samucha](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@Samucha](https://tech-community.robotics.abb.com/u/Samucha)\
**Post date:** [July 31, 2017, 11:03am UTC](https://tech-community.robotics.abb.com/t/create-wobj/7837/3 "2017-07-31T11:03:57Z")

</div>

Hi,ko414du4

Thanks you.  
Have any more ?

I mean used command or function create it.