# Customized tool using external axis

**URL:** <https://tech-community.robotics.abb.com/t/customized-tool-using-external-axis/9412>\
**Category:** RobotStudio\
**Created:** [April 7, 2020, 1:55pm UTC](https://tech-community.robotics.abb.com/t/customized-tool-using-external-axis/9412 "2020-04-07T13:55:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![simonpettsson](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@simonpettsson](https://tech-community.robotics.abb.com/u/simonpettsson)\
**Post date:** [April 7, 2020, 1:55pm UTC](https://tech-community.robotics.abb.com/t/customized-tool-using-external-axis/9412/1 "2020-04-07T13:55:27Z")

</div>

Hiya, new member, M.Sc student having a great interest for simulation equipments.

So, I am trying to figure out a way to create a tool (spotwelding gun) and to use an external axis for the control system to make the joints move. As I try to create a system with my created tool I just get the message seen in the picture below.

 ![image.jpg](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/1X/92294fd433342f6dbb5a6004eca6f4a4d0352881.jpeg)

My guess is that I messed something up when creating the tool itself. But after a little searching on the forums here I’m thinking of 2 other main reasons:

1. I need to get the Add-in “External Axes Wizard”.
2. It doesn’t work like this at all, and I need to approach the problem differently.

Any ideas?

---

<div class="post-metadata">

**Author:** ![graemepaulin](https://avatars.discourse-cdn.com/v4/letter/g/258eb7/32.png) [@graemepaulin](https://tech-community.robotics.abb.com/u/graemepaulin)\
**Post date:** [April 7, 2020, 8:03pm UTC](https://tech-community.robotics.abb.com/t/customized-tool-using-external-axis/9412/2 "2020-04-07T20:03:41Z")

</div>

I am no expert in this area - but yes I think you need to use the external axis wizard.

---

<div class="post-metadata">

**Author:** ![Maxim](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/maxim/32/4429_2.png) [@Maxim](https://tech-community.robotics.abb.com/u/Maxim)\
**Post date:** [April 8, 2020, 6:23am UTC](https://tech-community.robotics.abb.com/t/customized-tool-using-external-axis/9412/3 "2020-04-08T06:23:40Z")

</div>

What he said ^^

---

<div class="post-metadata">

**Author:** ![simonpettsson](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@simonpettsson](https://tech-community.robotics.abb.com/u/simonpettsson)\
**Post date:** [April 8, 2020, 8:03am UTC](https://tech-community.robotics.abb.com/t/customized-tool-using-external-axis/9412/4 "2020-04-08T08:03:32Z")

</div>

Thanks for the feedback!

---

<div class="post-metadata">

**Author:** ![simonpettsson](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@simonpettsson](https://tech-community.robotics.abb.com/u/simonpettsson)\
**Post date:** [April 17, 2020, 8:00am UTC](https://tech-community.robotics.abb.com/t/customized-tool-using-external-axis/9412/5 "2020-04-17T08:00:29Z")

</div>

Just to give an update, the external axis wizard solved the problems, the weld gun is now controllable by an external axis!
