# eio.cfg: Convert from S4C to IRC5

**URL:** <https://tech-community.robotics.abb.com/t/eio-cfg-convert-from-s4c-to-irc5/3263>\
**Category:** RobotStudio\
**Created:** [December 21, 2009, 2:13pm UTC](https://tech-community.robotics.abb.com/t/eio-cfg-convert-from-s4c-to-irc5/3263 "2009-12-21T14:13:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![peterax](https://avatars.discourse-cdn.com/v4/letter/p/b5a626/32.png) [@peterax](https://tech-community.robotics.abb.com/u/peterax)\
**Post date:** [December 21, 2009, 2:13pm UTC](https://tech-community.robotics.abb.com/t/eio-cfg-convert-from-s4c-to-irc5/3263/1 "2009-12-21T14:13:57Z")

</div>

Hi all,  
Is there any tool available to make a conversion of the eio.cfg from S4C to IRC5? Of course, there is the manual way but it would be nice with a quick tool, just for importing and testing of an old S4C in RS 5.

//Peter

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [January 7, 2010, 1:14pm UTC](https://tech-community.robotics.abb.com/t/eio-cfg-convert-from-s4c-to-irc5/3263/2 "2010-01-07T13:14:34Z")

</div>

Hi Peter,

Here is one, but be aware that this is not an official ABB software, so itA’s not supported by ABB, and you use it on “your own risk”.

[webwiz/51/EIOCfgConvert.zip](http://forums.robotstudio.com/webwiz/51/EIOCfgConvert.zip)

---

<div class="post-metadata">

**Author:** ![CRom11](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@CRom11](https://tech-community.robotics.abb.com/u/CRom11)\
**Post date:** [September 6, 2018, 8:43am UTC](https://tech-community.robotics.abb.com/t/eio-cfg-convert-from-s4c-to-irc5/3263/3 "2018-09-06T08:43:27Z")

</div>

Hi, long time, but the attachment is gone, any chance of a reupload, please?

---

<div class="post-metadata">

**Author:** ![Luxrobotic](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/luxrobotic/32/602_2.png) [@Luxrobotic](https://tech-community.robotics.abb.com/u/Luxrobotic)\
**Post date:** [September 25, 2018, 2:12pm UTC](https://tech-community.robotics.abb.com/t/eio-cfg-convert-from-s4c-to-irc5/3263/4 "2018-09-25T14:12:48Z")

</div>

HI,

I’m not sur that it works properly !  
[EIOCfgConvert.zip](https://tech-community.robotics.abb.com/uploads/short-url/pwMWwoMUeyI9uuNZNBYCJZkRfAt.zip) (1.01 MB)