# EIO.cfg

**URL:** <https://tech-community.robotics.abb.com/t/eio-cfg/420>\
**Category:** RobotStudio\
**Created:** [July 13, 2005, 12:57pm UTC](https://tech-community.robotics.abb.com/t/eio-cfg/420 "2005-07-13T12:57:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JK\_Hwang](https://avatars.discourse-cdn.com/v4/letter/j/dbc845/32.png) [@JK\_Hwang](https://tech-community.robotics.abb.com/u/JK_Hwang)\
**Post date:** [July 13, 2005, 12:57pm UTC](https://tech-community.robotics.abb.com/t/eio-cfg/420/1 "2005-07-13T12:57:05Z")

</div>

Is there any way converting eio from s4c+ to IRC5 automatically?

it’s slightly different when I comparing it.

---

<div class="post-metadata">

**Author:** ![RussD](https://avatars.discourse-cdn.com/v4/letter/r/dec6dc/32.png) [@RussD](https://tech-community.robotics.abb.com/u/RussD)\
**Post date:** [July 13, 2005, 3:42pm UTC](https://tech-community.robotics.abb.com/t/eio-cfg/420/2 "2005-07-13T15:42:02Z")

</div>

[MigrationGuide(A1.0).zip](http://forums.robotstudio.com/webwiz/MigrationGuideA1.0.zip)

Refer to the attached migration guide from 4.0 to 5.x.

---

<div class="post-metadata">

**Author:** ![JK\_Hwang](https://avatars.discourse-cdn.com/v4/letter/j/dbc845/32.png) [@JK\_Hwang](https://tech-community.robotics.abb.com/u/JK_Hwang)\
**Post date:** [July 14, 2005, 9:57am UTC](https://tech-community.robotics.abb.com/t/eio-cfg/420/3 "2005-07-14T09:57:17Z")

</div>

I can’t find EIOcfgConvert.exe for RW5.06.

Maybe old version contains EIOcfgConvert.exe but not in RW5.06.

* * *

Ken Hwang