# Error Logs

**URL:** <https://tech-community.robotics.abb.com/t/error-logs/6049>\
**Category:** Robot Controller\
**Created:** [March 28, 2014, 2:27pm UTC](https://tech-community.robotics.abb.com/t/error-logs/6049 "2014-03-28T14:27:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dan\_Kobus](https://avatars.discourse-cdn.com/v4/letter/d/b5ac83/32.png) [@Dan\_Kobus](https://tech-community.robotics.abb.com/u/Dan_Kobus)\
**Post date:** [March 28, 2014, 2:27pm UTC](https://tech-community.robotics.abb.com/t/error-logs/6049/1 "2014-03-28T14:27:47Z")

</div>

is there a way to save the error logs from the rapid program, say in an event routine. or is the only way to save the error logs, by manually saving them from the teach pendent.

thank you

---

<div class="post-metadata">

**Author:** ![Micky](https://avatars.discourse-cdn.com/v4/letter/m/a5b964/32.png) [@Micky](https://tech-community.robotics.abb.com/u/Micky)\
**Post date:** [April 3, 2014, 2:39pm UTC](https://tech-community.robotics.abb.com/t/error-logs/6049/2 "2014-04-03T14:39:46Z")

</div>

Hi,

there is no possibility to save the error log from the RAPID program.

/BR

Micky