# EtherNET/IP configuration error

**URL:** <https://tech-community.robotics.abb.com/t/ethernet-ip-configuration-error/12069>\
**Category:** OmniCore\
**Tags:** omnicore, ethernet-ip, robotware-7-15-2\
**Created:** [November 2, 2025, 4:46pm UTC](https://tech-community.robotics.abb.com/t/ethernet-ip-configuration-error/12069 "2025-11-02T16:46:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![czagawara](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@czagawara](https://tech-community.robotics.abb.com/u/czagawara)\
**Post date:** [November 2, 2025, 4:46pm UTC](https://tech-community.robotics.abb.com/t/ethernet-ip-configuration-error/12069/1 "2025-11-02T16:46:33Z")

</div>

Hi all,

I’m on **RobotStudio** 2025.3 Robot 1010 E10 controller **RobotWare** 7.15.2 Omnicore

Im configuring 3024-2 EtherNet/IP Adapter in IO engineering

When using **RobotWare** 7.15.2, every time I press ‘Write the configuration’ I’m **getting an error from** the **picture**.

I **built** the virtual station and I have the same results. When I **change** to e.g., 7.19, the problem is gone and all **is** working OK."

Did anyone expereince anything like this before ?

[https://1drv.ms/i/c/61525fb784a63d0a/ES1Xlb\_C6BpOrLoPVfmz55sBOySv9ZmKGYs5mrQVBqnOYQ?e=UDjRWq](https://1drv.ms/i/c/61525fb784a63d0a/ES1Xlb_C6BpOrLoPVfmz55sBOySv9ZmKGYs5mrQVBqnOYQ?e=UDjRWq)

Regards  
Bart

---

<div class="post-metadata">

**Author:** ![czagawara](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@czagawara](https://tech-community.robotics.abb.com/u/czagawara)\
**Post date:** [November 4, 2025, 7:43am UTC](https://tech-community.robotics.abb.com/t/ethernet-ip-configuration-error/12069/2 "2025-11-04T07:43:36Z")

</div>

Fixed by upgrading RW