# Exception when creating a new virtual controller

**URL:** <https://tech-community.robotics.abb.com/t/exception-when-creating-a-new-virtual-controller/10447>\
**Category:** UpFeed\
**Created:** [November 4, 2021, 10:18am UTC](https://tech-community.robotics.abb.com/t/exception-when-creating-a-new-virtual-controller/10447 "2021-11-04T10:18:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![EricH](https://avatars.discourse-cdn.com/v4/letter/e/ea5d25/32.png) [@EricH](https://tech-community.robotics.abb.com/u/EricH)\
**Post date:** [November 4, 2021, 10:18am UTC](https://tech-community.robotics.abb.com/t/exception-when-creating-a-new-virtual-controller/10447/1 "2021-11-04T10:18:42Z")

</div>

# RobotStudio .NET exception: Das aufgerufene Objekt wurde von den Clients getrennt. (Exception from HRESULT: 0x80010108 (RPC\_E\_DISCONNECTED))

Base exception: COMException  
Das aufgerufene Objekt wurde von den Clients getrennt. (Exception from HRESULT: 0x80010108 (RPC\_E\_DISCONNECTED))  
at RobotStudio.Services.RobApi.Interop.IRobVC.IsRunning(Int32& bRunning)  
at RobotStudio.Services.RobApi.RobVcFactory.d\_\_7.MoveNext()  
— End of stack trace from previous location where exception was thrown —  
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()  
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)  
at RobotStudio.Services.RobApi.RobVcFactory.\<\>c\_\_DisplayClass4\_0.\<b\_\_0\>d.MoveNext()  
— End of stack trace from previous location where exception was thrown —  
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()  
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)  
at RobotStudio.Services.RobApi.RobVcFactory.d\_\_4.MoveNext()  
— End of stack trace from previous location where exception was thrown —  
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()  
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)  
at RobotStudio.Services.Controller.ControllerService.d\_\_34.MoveNext()  
— End of stack trace from previous location where exception was thrown —  
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()  
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)  
at RobotStudio.Services.Controller.ControllerService.d\_\_32.MoveNext()  
— End of stack trace from previous location where exception was thrown —  
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()  
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)  
at RobotStudio.Services.Controller.ControllerService.d\_\_31.MoveNext()  
— End of stack trace from previous location where exception was thrown —  
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()  
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)  
at ABBInternal.Controller.StationVirtualControllerManager.d\_\_16.MoveNext()

---

<div class="post-metadata">

**Author:** ![Maxim](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/maxim/32/4429_2.png) [@Maxim](https://tech-community.robotics.abb.com/u/Maxim)\
**Post date:** [November 4, 2021, 10:27am UTC](https://tech-community.robotics.abb.com/t/exception-when-creating-a-new-virtual-controller/10447/2 "2021-11-04T10:27:51Z")

</div>

Hello,

To troubleshoot this issue, please contact your local ABB and provide the report via RobotStudio Support Tool.

Thanks!