# External Axis Wizard - Add-In

**URL:** <https://tech-community.robotics.abb.com/t/external-axis-wizard-add-in/4549>\
**Category:** RobotStudio\
**Created:** [November 27, 2011, 9:43pm UTC](https://tech-community.robotics.abb.com/t/external-axis-wizard-add-in/4549 "2011-11-27T21:43:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![marcus](https://avatars.discourse-cdn.com/v4/letter/m/85e7bf/32.png) [@marcus](https://tech-community.robotics.abb.com/u/marcus)\
**Post date:** [November 27, 2011, 9:43pm UTC](https://tech-community.robotics.abb.com/t/external-axis-wizard-add-in/4549/1 "2011-11-27T21:43:41Z")

</div>

Hej,

I’ve installed the add-in External Axis Wizard.

In my RS Add-in Tab I found the External Axis Wizard in the general tree… I’ve clicked with right button and loaded the add-in.

But and now ?

How that add-in is proposal to use ? Do you have any manual ?  
After load the add-in, where can I “try to use” in the RS ?

Thank you in advanced,  
Marcus Daniel

---

<div class="post-metadata">

**Author:** ![Marcel](https://avatars.discourse-cdn.com/v4/letter/m/71e660/32.png) [@Marcel](https://tech-community.robotics.abb.com/u/Marcel)\
**Post date:** [November 28, 2011, 8:20am UTC](https://tech-community.robotics.abb.com/t/external-axis-wizard-add-in/4549/2 "2011-11-28T08:20:38Z")

</div>

Hi

I had the same problem and a colleague from ABB helped me.

You can find the External Axis Wizard under: Home, Robot System.

Best regards

Marcel

---

<div class="post-metadata">

**Author:** ![marcus](https://avatars.discourse-cdn.com/v4/letter/m/85e7bf/32.png) [@marcus](https://tech-community.robotics.abb.com/u/marcus)\
**Post date:** [November 28, 2011, 11:55am UTC](https://tech-community.robotics.abb.com/t/external-axis-wizard-add-in/4549/3 "2011-11-28T11:55:03Z")

</div>

Thank you Marcel !!! Now I found …

Great! 😉