# Fail with installation of RobotWare

**URL:** <https://tech-community.robotics.abb.com/t/fail-with-installation-of-robotware/9413>\
**Category:** Robot Controller\
**Created:** [April 8, 2020, 1:52pm UTC](https://tech-community.robotics.abb.com/t/fail-with-installation-of-robotware/9413 "2020-04-08T13:52:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bryan\_Tamayo](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/bryan_tamayo/32/3187_2.png) [@Bryan\_Tamayo](https://tech-community.robotics.abb.com/u/Bryan_Tamayo)\
**Post date:** [April 8, 2020, 1:52pm UTC](https://tech-community.robotics.abb.com/t/fail-with-installation-of-robotware/9413/1 "2020-04-08T13:52:18Z")

</div>

Hello!  
I am a student of university that need use RobotStudio to do a practice. My issue is that when the program start up appear this message:

 ![image.jpg](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/1X/966a07d74a0b3790698927f4274ad5f22ba37b4c.jpeg)  
And later I do click in “Yes” then It appears:  
 ![image.jpg](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/2X/b/bf4ca6882bdb299d964d3a3c99769bd0951ab26e.jpeg)  
But this is impossible because I am connected to Internet. When I want to install a Virtual Controller, doesn’t me appear the RobotWare Controller. Doing a little more research, this message appears:  
 ![image.jpg](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/1X/4461892dcb5ccd05c7c3caef12ae1c7727e577e9.jpeg)  
Currently my IP is 192.168.0.52 and I don’t know how to fix it. Should I change my IP to the range of the message above?

Regards,  
Bryan

---

<div class="post-metadata">

**Author:** ![DenisFR](https://avatars.discourse-cdn.com/v4/letter/d/dc4da7/32.png) [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\
**Post date:** [April 13, 2020, 1:40pm UTC](https://tech-community.robotics.abb.com/t/fail-with-installation-of-robotware/9413/2 "2020-04-13T13:40:48Z")

</div>

Hello,  
What do you want to do exactly?  
You have to install RobotWare to run virtual controller.  
The message box telling you to go on 192.168.125.0/24 subnet is displayed when you want to connect to real controller Online.  
Please, follow some tutorials you can found on YouTube or else.