# Forgot Password

**URL:** <https://tech-community.robotics.abb.com/t/forgot-password/6729>\
**Category:** Robot Controller\
**Created:** [July 27, 2015, 8:11am UTC](https://tech-community.robotics.abb.com/t/forgot-password/6729 "2015-07-27T08:11:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Koray](https://avatars.discourse-cdn.com/v4/letter/k/85f322/32.png) [@Koray](https://tech-community.robotics.abb.com/u/Koray)\
**Post date:** [July 27, 2015, 8:11am UTC](https://tech-community.robotics.abb.com/t/forgot-password/6729/1 "2015-07-27T08:11:47Z")

</div>

Hello  
We have problem with UAS. One of our robot has lost its calibration. Now we want to calibrate but we can’t find user password. How can we reset password? Should we delete system and rebuilt? If the answer is rebuilt then what should we do to save rapid program? We have authorization to take bakup so is it enough to restore system to save rapid program after rebuilt system?

---

<div class="post-metadata">

**Author:** ![amardebbari](https://avatars.discourse-cdn.com/v4/letter/a/da6949/32.png) [@amardebbari](https://tech-community.robotics.abb.com/u/amardebbari)\
**Post date:** [November 23, 2015, 3:18pm UTC](https://tech-community.robotics.abb.com/t/forgot-password/6729/2 "2015-11-23T15:18:10Z")

</div>

Hello  
yes when you do Backup it enough to save a rapid Program and SYSPAR and HOME but how to reset password i don’t know  
B.R  
Amar