# Formula One

**URL:** <https://tech-community.robotics.abb.com/t/formula-one/58>\
**Category:** RobotStudio S4\
**Created:** [June 11, 2003, 11:24am UTC](https://tech-community.robotics.abb.com/t/formula-one/58 "2003-06-11T11:24:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/system/32/6_2.png) [@system](https://tech-community.robotics.abb.com/u/system)\
**Post date:** [June 11, 2003, 11:24am UTC](https://tech-community.robotics.abb.com/t/formula-one/58/1 "2003-06-11T11:24:19Z")

</div>

Formula one OCX. Error Code = 0 (Windows 2000)

I get this error when i try to open ProgramMaker. What can be wrong.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/system/32/6_2.png) [@system](https://tech-community.robotics.abb.com/u/system)\
**Post date:** [June 12, 2003, 3:05pm UTC](https://tech-community.robotics.abb.com/t/formula-one/58/2 "2003-06-12T15:05:40Z")

</div>

When the user is a “Restricted User” in Windows 2000 ProgramMaker will crash at startup,  
the following error will be displayed :

 

Formula One OCX. Error Code = 0

This error will occur because restricted user’s do not have the proper access  
level to perform some of the operations made by ProgramMaker.

The workaround to this problem is to change the users access level to “Standard User” or higher.

Best Regards

/Ulrika Mor?n

ABB Automation Technology Products AB