# FTP and Large Files

**URL:** <https://tech-community.robotics.abb.com/t/ftp-and-large-files/6518>\
**Category:** Robot Controller\
**Created:** [February 28, 2015, 1:10am UTC](https://tech-community.robotics.abb.com/t/ftp-and-large-files/6518 "2015-02-28T01:10:27Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bickford](https://avatars.discourse-cdn.com/v4/letter/b/3be4f8/32.png) [@bickford](https://tech-community.robotics.abb.com/u/bickford)\
**Post date:** [February 28, 2015, 1:10am UTC](https://tech-community.robotics.abb.com/t/ftp-and-large-files/6518/1 "2015-02-28T01:10:27Z")

</div>

Hi Everyone,

I have an application where I need to move files larger than 2000kb to the controller from a remote computer. The load/unload of the modules will be done before the job is run (robot will not be in motion).

Unfortunately I didn’t notice the “Maximum File Size” parameter had a limit of 2000kb until today. Is there any way around this?

I do have the PC interface, and FTP/NFS options if there is another method that would work better.

Thank you for any help,

Chris