# ftp password s4c+

**URL:** <https://tech-community.robotics.abb.com/t/ftp-password-s4c/3867>\
**Category:** Robot Controller\
**Created:** [October 19, 2010, 11:58am UTC](https://tech-community.robotics.abb.com/t/ftp-password-s4c/3867 "2010-10-19T11:58:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jabies](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/jabies/32/4373_2.png) [@jabies](https://tech-community.robotics.abb.com/u/jabies)\
**Post date:** [October 19, 2010, 11:58am UTC](https://tech-community.robotics.abb.com/t/ftp-password-s4c/3867/1 "2010-10-19T11:58:16Z")

</div>

Hi,

does anyone knows the old password, to access the s4c+ by ftp?

was it 007 ?

name: abb  
pw: 007

?

---

<div class="post-metadata">

**Author:** ![charon](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/charon/32/87_2.png) [@charon](https://tech-community.robotics.abb.com/u/charon)\
**Post date:** [October 19, 2010, 12:13pm UTC](https://tech-community.robotics.abb.com/t/ftp-password-s4c/3867/2 "2010-10-19T12:13:53Z")

</div>

Hi,

S4C+ controllers at my factory doesnt need a specific string for password textbox when i try to connect over FTP program.  
Did you get a password related error when you try to connect?  
Have you configure ur computer’s TCP/IP as described in manual?