# Generate station from real robot backup with ProfiSAFe option

**URL:** <https://tech-community.robotics.abb.com/t/generate-station-from-real-robot-backup-with-profisafe-option/14869>\
**Category:** RobotStudio\
**Tags:** rapid\
**Created:** [March 24, 2026, 8:03am UTC](https://tech-community.robotics.abb.com/t/generate-station-from-real-robot-backup-with-profisafe-option/14869 "2026-03-24T08:03:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![RookieWithRobots75](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@RookieWithRobots75](https://tech-community.robotics.abb.com/u/RookieWithRobots75)\
**Post date:** [March 24, 2026, 8:03am UTC](https://tech-community.robotics.abb.com/t/generate-station-from-real-robot-backup-with-profisafe-option/14869/1 "2026-03-24T08:03:53Z")

</div>

So the question is: is there possibility to disable ProfiSAFE option in RobotStudio? What I have found out, only possibility is to make/define those safety settings, load those in to virtual controller and restart it. Ok, it’s not so big think, but…..

---

<div class="post-metadata">

**Author:** ![LawrenceElectrolux](https://avatars.discourse-cdn.com/v4/letter/l/8491ac/32.png) [@LawrenceElectrolux](https://tech-community.robotics.abb.com/u/LawrenceElectrolux)\
**Post date:** [March 24, 2026, 9:32pm UTC](https://tech-community.robotics.abb.com/t/generate-station-from-real-robot-backup-with-profisafe-option/14869/2 "2026-03-24T21:32:09Z")

</div>

Normally, Options can be selected/deselected in the Installation Manager of the RobotStudio. Hope that is what you are looking for.

---

<div class="post-metadata">

**Author:** ![RookieWithRobots75](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@RookieWithRobots75](https://tech-community.robotics.abb.com/u/RookieWithRobots75)\
**Post date:** [March 27, 2026, 5:02am UTC](https://tech-community.robotics.abb.com/t/generate-station-from-real-robot-backup-with-profisafe-option/14869/3 "2026-03-27T05:02:37Z")

</div>

I was looking something that I don’t need to take away from project specific safety settings. This solution I already knew​😉

---

<div class="post-metadata">

**Author:** ![Simmu](https://avatars.discourse-cdn.com/v4/letter/s/e0b2c6/32.png) [@Simmu](https://tech-community.robotics.abb.com/u/Simmu)\
**Post date:** [March 29, 2026, 5:41pm UTC](https://tech-community.robotics.abb.com/t/generate-station-from-real-robot-backup-with-profisafe-option/14869/4 "2026-03-29T17:41:47Z")

</div>

I’m not sure I understood you correctly, but what you might want to try is to tick the box “Include Safety Settings” in the restore backup dialog window. This will create your station controller with the same safety signals and functionality as your real one.