# Help needed for painting controller

**URL:** <https://tech-community.robotics.abb.com/t/help-needed-for-painting-controller/11117>\
**Category:** RobotStudio\
**Created:** [May 5, 2023, 7:49pm UTC](https://tech-community.robotics.abb.com/t/help-needed-for-painting-controller/11117 "2023-05-05T19:49:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![H\_K](https://avatars.discourse-cdn.com/v4/letter/h/ecb155/32.png) [@H\_K](https://tech-community.robotics.abb.com/u/H_K)\
**Post date:** [May 5, 2023, 7:49pm UTC](https://tech-community.robotics.abb.com/t/help-needed-for-painting-controller/11117/1 "2023-05-05T19:49:44Z")

</div>

Hello,

I am building a station with 8 painting robotics (IRB5500 floor mounted) with robotbells 625TD.  
When i try to make one controller i cant add the robotics simultaneously.

The error is the combination is not supported.

Do i need to make 8 individual controllers or?

---

<div class="post-metadata">

**Author:** ![Neily03](https://avatars.discourse-cdn.com/v4/letter/n/c6cbf5/32.png) [@Neily03](https://tech-community.robotics.abb.com/u/Neily03)\
**Post date:** [May 9, 2023, 8:14am UTC](https://tech-community.robotics.abb.com/t/help-needed-for-painting-controller/11117/2 "2023-05-09T08:14:27Z")

</div>

Yes you need a controller for each robot.