# How can I control the joint of SmartGripper via RAPID procedures?

**URL:** <https://tech-community.robotics.abb.com/t/how-can-i-control-the-joint-of-smartgripper-via-rapid-procedures/7015>\
**Category:** RobotStudio\
**Created:** [February 24, 2016, 9:38am UTC](https://tech-community.robotics.abb.com/t/how-can-i-control-the-joint-of-smartgripper-via-rapid-procedures/7015 "2016-02-24T09:38:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rpereira91](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@rpereira91](https://tech-community.robotics.abb.com/u/rpereira91)\
**Post date:** [February 24, 2016, 9:38am UTC](https://tech-community.robotics.abb.com/t/how-can-i-control-the-joint-of-smartgripper-via-rapid-procedures/7015/1 "2016-02-24T09:38:18Z")

</div>

Hi, I’m working in RobotStudio with Yumi. How can I control the Joint of the SmartGripper Camera + Fingers via RAPID? I had already installed the Add-In SmartGripper 3.10 but i don’t know the procedures to do so.  
Thank you,  
Rute Pereira
