# How to configure UAS on OmniCore controller?

**URL:** <https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955>\
**Category:** OmniCore\
**Tags:** uas, omnicore\
**Created:** [January 27, 2021, 7:34am UTC](https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955 "2021-01-27T07:34:09Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fritz](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@Fritz](https://tech-community.robotics.abb.com/u/Fritz)\
**Post date:** [January 27, 2021, 7:34am UTC](https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955/1 "2021-01-27T07:34:09Z")

</div>

Edit user accounts is greyed out in Robotstudio, if connected to OmniCore. Also did not find any possibilities to add/remove users on Flexpendant.  
Thank’s!

---

<div class="post-metadata">

**Author:** ![lemster68](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/lemster68/32/1945_2.png) [@lemster68](https://tech-community.robotics.abb.com/u/lemster68)\
**Post date:** [January 27, 2021, 1:21pm UTC](https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955/2 "2021-01-27T13:21:15Z")

</div>

Are you logged in as a user that has those rights? Safety user, administrator?

---

<div class="post-metadata">

**Author:** ![Fritz](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@Fritz](https://tech-community.robotics.abb.com/u/Fritz)\
**Post date:** [January 27, 2021, 1:37pm UTC](https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955/3 "2021-01-27T13:37:55Z")

</div>

Any hints about default passwords for those users?  
I did not find them in OmniCore controller manual.

---

<div class="post-metadata">

**Author:** ![Tompanhuhu](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/tompanhuhu/32/3366_2.png) [@Tompanhuhu](https://tech-community.robotics.abb.com/u/Tompanhuhu)\
**Post date:** [February 10, 2021, 2:27pm UTC](https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955/4 "2021-02-10T14:27:48Z")

</div>

> [@Fritz](#):
>
> Any hints about default passwords for those users?  
> I did not find them in OmniCore controller manual.

ABB robotics support has told me the default admin user is:  
Username: Admin  
Password: robotics

I have not tried it myself.

---

<div class="post-metadata">

**Author:** ![Fritz](https://avatars.discourse-cdn.com/v4/letter/f/c57346/32.png) [@Fritz](https://tech-community.robotics.abb.com/u/Fritz)\
**Post date:** [February 11, 2021, 11:37am UTC](https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955/5 "2021-02-11T11:37:29Z")

</div>

> [@Tompanhuhu](#):
>
> Username: Admin  
> Password: robotics

Thank you!  
That did the trick.

---

<div class="post-metadata">

**Author:** ![CobotGirl](https://avatars.discourse-cdn.com/v4/letter/c/8797f3/32.png) [@CobotGirl](https://tech-community.robotics.abb.com/u/CobotGirl)\
**Post date:** [January 24, 2022, 10:03am UTC](https://tech-community.robotics.abb.com/t/how-to-configure-uas-on-omnicore-controller/9955/6 "2022-01-24T10:03:14Z")

</div>

Does it matter if it is “Admin” or “admin”?