# How to sync "Offs()" to station?

**URL:** <https://tech-community.robotics.abb.com/t/how-to-sync-offs-to-station/249>\
**Category:** RobotStudio S4\
**Created:** [December 8, 2004, 1:40am UTC](https://tech-community.robotics.abb.com/t/how-to-sync-offs-to-station/249 "2004-12-08T01:40:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![wooa3](https://avatars.discourse-cdn.com/v4/letter/w/fbc32d/32.png) [@wooa3](https://tech-community.robotics.abb.com/u/wooa3)\
**Post date:** [December 8, 2004, 1:40am UTC](https://tech-community.robotics.abb.com/t/how-to-sync-offs-to-station/249/1 "2004-12-08T01:40:23Z")

</div>

Hello, everyone.

I use often “Offs()” functon in real programming.

But I can’t sync those targets to station.

Please show me how to sync “Offs()” target to station?

---

<div class="post-metadata">

**Author:** ![John\_Wiberg](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/john_wiberg/32/1485_2.png) [@John\_Wiberg](https://tech-community.robotics.abb.com/u/John_Wiberg)\
**Post date:** [December 9, 2004, 3:04pm UTC](https://tech-community.robotics.abb.com/t/how-to-sync-offs-to-station/249/2 "2004-12-09T15:04:02Z")

</div>

Hello wooa3,

You can’t sync offsets to the station since they are not targets but rather references to a target. Since they don’t exist RS wont sync them.:grinning:

You can still use the “Execute procedure” command in combination with “Simulation Monitor -Trace” to look at your offset motions though since the VC simulates them correctly.:stuck\_out\_tongue\_winking\_eye: