# I can not save offline programming.

**URL:** https://tech-community.robotics.abb.com/t/i-can-not-save-offline-programming/10261
**Category:** RobotStudio
**Created:** [June 18, 2021, 7:31am UTC](https://tech-community.robotics.abb.com/t/i-can-not-save-offline-programming/10261 "2021-06-18T07:31:39Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![awojt](https://avatars.discourse-cdn.com/v4/letter/a/ce73a5/32.png) [@awojt](https://tech-community.robotics.abb.com/u/awojt)
#### Post date: [June 18, 2021, 7:31am UTC](https://tech-community.robotics.abb.com/t/i-can-not-save-offline-programming/10261/1 "2021-06-18T07:31:39Z")

</div>

I created a virtual controller from backup of the real one and I am trying to modify the rapid program. When I am accepting changes the yellow stripe on the left stays yellow and I can’t close the window. I am getting question if I want to save, I am answering “Yes” and windows is not closing and status indicates file unsaved.

---

<div class="post-metadata">

### Author: ![kkNielsen](https://avatars.discourse-cdn.com/v4/letter/k/c89c15/32.png) [@kkNielsen](https://tech-community.robotics.abb.com/u/kkNielsen)
#### Post date: [June 21, 2021, 9:26am UTC](https://tech-community.robotics.abb.com/t/i-can-not-save-offline-programming/10261/2 "2021-06-21T09:26:54Z")

</div>

Does your output window give you any logs?

---

<div class="post-metadata">

### Author: ![lemster68](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/lemster68/32/1945_2.png) [@lemster68](https://tech-community.robotics.abb.com/u/lemster68)
#### Post date: [June 21, 2021, 2:38pm UTC](https://tech-community.robotics.abb.com/t/i-can-not-save-offline-programming/10261/3 "2021-06-21T14:38:41Z")

</div>

Can you “save module as” from the virtual pendant?