# I can't display Program Modules

**URL:** <https://tech-community.robotics.abb.com/t/i-cant-display-program-modules/3764>\
**Category:** Robot Controller\
**Created:** [August 25, 2010, 3:15am UTC](https://tech-community.robotics.abb.com/t/i-cant-display-program-modules/3764 "2010-08-25T03:15:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![2ndworks](https://avatars.discourse-cdn.com/v4/letter/2/7c8e57/32.png) [@2ndworks](https://tech-community.robotics.abb.com/u/2ndworks)\
**Post date:** [August 25, 2010, 3:15am UTC](https://tech-community.robotics.abb.com/t/i-cant-display-program-modules/3764/1 "2010-08-25T03:15:47Z")

</div>

// Software - RobotStudio 5.13.01  
// Operation version : Windows 7 Ultimate 32 Bit  
// Controller (Drive Machine) - IRB600  
// Controller’s Robotstudio Version - 5.07.1025

Hi, ABB Forum everyone.

I’m hang up by Trouble.

[One]  
Insert RJ45 cable at Controller and Notebook.  
IP configuration well done.  
(automation client192.168.125.2 // host controller 192.168.152.1)

[Two]  
Execute RobotStudio 5.13  
and, “Online” - “One click connect” Click.

Look at this screen shot.

pic 1. Where Tasks?

T\_ROB1 (Program ‘Roboter\_2\_WM’) on Mouse pointer.  
And mouse right click → “Show Program pointer” click..

wow. I got it!

but, I can’t write mainmodule program.  
huh?  
Of course. I’ve already done **“Request Access Write” (RS click and PPendant Grant)**

However Logged Another Accout.

but… same way.

OK. My Question is this.

How can I got a Write access permission during controller manual mode?

Before 1 month, well controlled another IRB-6600 controller. (Robotstudio 5.12 Version included)

hmm.. I guess … this controller RStudio Version too lower than 5.12 ?

anyone help plz…