# Import Smart Components

**URL:** <https://tech-community.robotics.abb.com/t/import-smart-components/12078>\
**Category:** RobotStudio\
**Created:** [November 11, 2025, 1:33pm UTC](https://tech-community.robotics.abb.com/t/import-smart-components/12078 "2025-11-11T13:33:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Syfffi](https://avatars.discourse-cdn.com/v4/letter/s/d26b3c/32.png) [@Syfffi](https://tech-community.robotics.abb.com/u/Syfffi)\
**Post date:** [November 11, 2025, 1:33pm UTC](https://tech-community.robotics.abb.com/t/import-smart-components/12078/1 "2025-11-11T13:33:55Z")

</div>

Hi everyone,  
I’m using the latest version of RobotStudio, and I can’t find where to download models of sensors, conveyors, and other equipment. The “Library Browser” in my version only opens a local folder, but there are no online models available.

Could someone please tell me where I can download or import these equipment models (for example, Smart Components, conveyors, or sensors)?  
Thanks in advance!

---

<div class="post-metadata">

**Author:** ![Kenny-RenYi\_Jiang](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@Kenny-RenYi\_Jiang](https://tech-community.robotics.abb.com/u/Kenny-RenYi_Jiang)\
**Post date:** [November 12, 2025, 8:19am UTC](https://tech-community.robotics.abb.com/t/import-smart-components/12078/2 "2025-11-12T08:19:49Z")

</div>

Sensors are included in SmartComponent. You do not need to download SmartComponent.

To check default SmartComponent, you can do as either of follows:  
(1) Click ‘Simulation’ ribbon, click ‘Station logic’ button, click ‘Compose’ tab, click ‘Add component’ button, then you can see all the default SmartComponent  
(2) Click ‘Modeling’ ribbon, click ‘Smart Component’ button, click ‘Compose’ tab in your created smart component, click ‘Add component’ button, and then the same as step (1)

As conveyor, you can click ‘Modeling’ ribbon, click ‘Create Conveyor’ to create conveyor based on your own model. I’m not sure if there is official model for conveyor.

---

<div class="post-metadata">

**Author:** ![mandolas](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/mandolas/32/2496_2.png) [@mandolas](https://tech-community.robotics.abb.com/u/mandolas)\
**Post date:** [November 19, 2025, 1:58pm UTC](https://tech-community.robotics.abb.com/t/import-smart-components/12078/3 "2025-11-19T13:58:25Z")

</div>

Hi…  
I’m not aware of any repository for downloading ready-made components.  
When I need something new, I download the 3D model and assemble the component as my colleague @KennyJiang commented.  
Good job!